TANGO™
2Pages

Integrating Sound Level Meter type 1 according to IEC 61672 Technical Data Class 1 according to IEC 60651 / 60804 / 61672 PTB approval 21.21 / 12.04 - Sound pressure level LAF, LAS - Maximum sound level LAFmax, LASmax - Minimum sound level LAFmin, LASmain - Equivalent sound pressure level LAeq - Peak value LCpeak - Sound dose LAE - Taktmaximal level LAtm5 - 3x LCpeak_exceedance (freely selectable) Freq. weightings A + C peak Time weightings Fast, Slow Ranges 25 ... 140 dB (LAeq) 60 ... 143 dB (LCpeak) Resolution 0.1 dB Display Illuminated LCD: - Measured value with 3.5 digits - Bar graph in 5 dB steps < under-range > over range - Measurement time (hh:mm:ss) - Battery status - Memory status Microphone 1/2" microphone MK255, 50 mV/Pa Connector LEMO7 1B (for Micro Extension Cable) 3.5 mm jack (audio signal output) Calibration Automatic with external 94 dB calibrator Storage cycles Individually selectable for all values Interface USB 2.0 Batteries 2x AA (1.2 ... 1.5 V) Operating time > 120 h (per set of 2x batteries 2.7 Ah ) Storage time 10 years for lithium batteries Dimensions 190mm x 70mm x 32mm Weight 250 g (including batteries) Scope of delivery Sound level meter, windscreen, 1.5m USB interface cable, manual, mains power supply, carrying case, Tango-Utilities software • General sound level measurements Accuracy Type approval Meas. values Option Option Option Option Option Percentiles + 8 MB in base delivery 1/2" calibrator (Cal200) Tripod with carrying case Tango Outdoor Kit AUDITOR_light software package SINUS Messtechnik GmbH D-04347 Leipzig, Foepplstraße 13 • Noise measurements at the workplace • Environmental noise measurements • Monitoring of traffic noise Tango-Utilities Software The Tango-Utilities software shows all settings at a glance and allows the user to change these on the PC screen. The measurement can be controlled from the PC with the START and STOP buttons. Immediately after connecting to the PC via the USB cable, the internal clock of the Tango is automatically synchronized with that of the PC. Tango-Utilities can be installed on all PCs with Windows 2000 or higher – the installation CD is included in the scope of delivery. A USB port is necessary for data exchange with Tango. After attachment to the USB interface the sound level meter is powered from the PC. Messtechnik GmbH Tango, SINUS and SAMURAI are registered trademarks of SINUS Messtechnik GmbH info@sinusmess.de www.soundbook.de

Powerful Basic Sound Level Meter Measurement according to the IEC 61672 standard TANGO™ - entry-level sound level meter for all measurements necessary in workplace and environmental protection Modern technology combines utmost accuracy with simplest operation Highest ease of use via integrated software package: TANGO-Utilities for Windows TANGO system integration with AUDITOR™ post-processing software The Tango™ sound level meter is a compact Class 1 basic sound level meter according to IEC 61672 for workplace and environmental protection applications. Due to its intelligent software...