TANGO Plus
2Pages

TANGO Plus Integrating Sound Level Meter class 1 according to IEC 61672 with 1/3 octave analyser according to IEC 61260 • General sound level measurements Technical Data Accuracy Type approval Meas. values Freq. weightings Time weightings Ranges Resolution Display Microphone Connector Calibration Storage cycles Interface Batteries Operating time Dimensions Weight Scope of delivery Option Option Option Option Option Class 1 according to IEC 61672 and IEC 61260 PTB approval applied for - Sound pressure level LAF, LAS, LCF, LCS - 1/1 and 1/3 octave spectra (A, C, Z) - Maximum sound level LAFmax, LASmax, LCFmax, LAImax - Minimum sound level LAFmin, LASmin, LCFmin - Equivalent sound pressure level LAeq, LCeq - Peak value LCpeak - Sound dose LAE - Taktmaximal level LAFT, LAFTeq - 3x Statistical values LAFn (freely selectable) - 3x LCpeak_exceedance (freely selectable) - LCeq - LAeq, LAFTeq - LAeq A+C Fast, Slow, Impulse, Peak 25 ... 140 dB (LAeq) 60 ... 143 dB (LCpeak) 0.1 dB color TFT 320 x 240 dots - measured value with 3.5 digits - bar graphs, spectra, time history - under range / over range indicator - Measurement time (hh:mm:ss) - Battery status - Memory status 1/2" microphone MK255, 50 mV/Pa - LEMO7 1B (for Micro Extension Cable) - RS232 special connector (for printer) - 3.5 mm jack (audio output) Automatic with external 94 dB calibrator Individually selectable for all values USB 2.0, RS232 printer port 2x AA (1.2 ... 1.5 V) > 40 h (per set of 2x batteries 2.7 Ah ) 190mm x 70mm x 32mm 250 g (including batteries) Sound level meter, windscreen, 1.5m USB interface cable, user manual, mains power supply, carrying case, Tango-Utilities software • Noise measurements at the workplace • Environmental noise measurements • Monitoring of traffic noise • real-time 1/1 and 1/3 octave analysis Software Tango Utilities The Tango-Utilities software shows all settings at a glance and allows the user to change these on the PC screen. The measurement can be controlled from the PC with the START and STOP buttons. Immediately after connecting to the PC via the USB cable, the internal clock of the Tango is automatically synchronized with that of the PC. Tango-Utilities software can be installed on all PCs with Windows7 or higher – the installation CD is included in the scope of delivery. A USB port is necessary for data exchange with Tango. After attachment to the USB interface, the sound level meter is powered from the PC. 1/2" calibrator (Cal200) Tripod with carrying bag Tango Outdoor Kit Battery powered thermo printer Thermo printer (battery powered) SINUS Messtechnik GmbH Foepplstrasse 13 Phone: +49 341 244290 04347 Leipzig Fax: +49 341 2442999 Germany www.soundbook.de

Powerful Sound Level Meter / Analyser TANGO Plus - sound level meter / analyser for all measurements necessary in workplace and environmental protection Modern technology combines utmost accuracy with simplest operation Highest ease of use via integrated software package: TANGO-Utilities for Windows TANGO Plus system integration with AUDITOR™ post-processing software The Tango Plus sound level meter is a compact Class 1 sound level meter according to IEC 61672 with 1/1 and 1/3 octave analyser for workplace and environmental protection applications. Due to its intelligent software concept...