Water Flow Heaters
6Pages

Catalog excerpts

Sinus Jevi Water Flow Heaters Flow heater units exists of an inner- and outer cylindrical thermal galvanised steel hull, with an exchangeable heating element and is intended to prevent cooling as a consequence of heat losses of storage tanks and supply- and return lines and is therefore part of a closed loop heating circuit. This type is suitable for mounting in a piping system. Sinus-Jevi Electric Heating B.V.

Open the catalog to page 1

Catalogue Water Heaters FLOW HEATER FOR CLOSED CIRCUIT TYPE BVU-D EXECUTION The flow heater unit exists of an inner- and outer cylindrical thermal galvanised steel hull, with an exchangeable heating element. • Available from 2 to 9 kW • Executed with ¾”BSP threaded sockets • Including an adjustable thermostat 0 to 45°C or 30 to 85°C • Additionally equipped with an integrated maximum temperature thermostat with manual reset; 76°C or 110°C • No need for separate junction box • Casing hull of thermic galvanised steel • Connection housing of galvanised steel plating • Heating elements Incoloy...

Open the catalog to page 2

Catalogue Water Heaters Flow Heaters type BVU-D Temperature adjustability 30 - 85°C Type Article number Article number Temperature adjustability 0 - 45°C Type front view without cap

Open the catalog to page 3

Catalogue Water Heaters Flow Heaters type BVU-DD • Deliverable up to 18 kW • Executed with ¾” BSP threaded sockets • Adjustable thermostat 0 to 45°C (thermal safety 76°C) or 30 to 85°C (thermal safety 110°C) • No need for separate junction box • Flow hull of AISI 316 • Heating elements Incoloy 825 • Maximum working pressure 6 bar • Equipped with 2 mounting brackets • 1½” BSP Brass gland • IP55 EXECUTION The Flow heater exists of a Stainless Steel hull with two exchangeable heating elements. APPLICATION The Flow heater is intended to prevent cooling as a consequence of heat losses of storage...

Open the catalog to page 4

Catalogue Water Heaters Flow Heaters type BLH APPLICATION The electrical flow heater for central heating systems is to be applied for the heating of luxury yachts, controls buildings, secondary heating systems and frost protection installations. The device can easily be build in existing systems. The BLH is equipped with a complete temperature control and temperature safety. The pump switch and room thermostat are no integral part of this controls. The BLH has to be mounted to a wall, horizontally or vertically with the connection box facing down. Mains Power supply Controls circuit Max....

Open the catalog to page 5

Sinus is one of the pioneers in the field of explosion proof heating equipment, today we are still operating at For the production of Ex-proof equipment a PQAN (Product by Sinus-Jevi Electric Heating B.V.

Open the catalog to page 6