ELECTRIC HEATING BATH HEATERS

THERMODYP BATH HEATERS Bath heaters of the Thermodyp range is a complete electric program for heating of tubs and tanks within the galvanic industry, deacidification and degrease systems and for tanks in fish farms. Thermodyp bath heaters are available with sheath of different materials e.g. porcelain, titanium, PTFE coated steel, stainless steel and quartzglass. The heating element is made as an exchangeable ceramic insert with wires of nickel/chrom or CR/AL. Below is a list of standard items - other lengths, cold zones, voltage and wattages can be supplied. The PVC cap with cable entry is IP55...

THERMODYP BATH HEATERS INSTALLATION The bath heater must be installed so that the heated zone is always covered by liquid. The heated zone is marked on the heater. Please make sure that the cap remains free from and above the liquid. If the tub is covered by a lid it is necessary to cut a hole for the bath heater so that any accumulated heat can be given off. The cap must not be exposed to more than 70°C. For further details please see the instructions enclosed with the product. BATH HEATERS WITH TUBULAR ELEMENTS Cold zone 100 mm BATH HEATERS WITH TUBULAR ELEMENTS This type is supplied with tubular...

Sinus Jevi Electric Heating B.V. Nijverheidsweg 2 1671 GC Medemblik The Netherlands Phone: +31 (0)227-549100 Fax: +31 (0)227-549150 E-mail: [email protected] Web site: www.sinusjevi.com No rights can be derived from the text, illustrations and samples. We reserve the right to change materials, parts, assemblies, designs, colours, finishes etc. without prior notification.