Catalog excerpts
Our WD-H finned-tube heaters are designed for industrial use in drying rooms, engine rooms, pumping houses, elevator shafts, as protection from frost, etc. The heater does not require further protection. Liquids £2) Gasses Solids Spaces £^ Resistors Sinus-Jevi Electric Heating B.V. Aambeeld 19 1671 NT Medemblik +31 (0) 227 549 100
Open the catalog to page 1Catalogue Finned Tube Heaters type WD/GG-H (RVS) Our WD-H finned-tube heaters are designed for industrial application. Because of their high level of reliability, they are especially suitable for all heating applications at an ambient temperature of up to 60°C. Due to the fact that their construction is in accordance with IP65, they are also suitable for damp areas. The heaters must be installed by skilled personnel. Because of the high surface temperature, they are not suitable for rooms containing inflammable materials and in areas with a possible risk of explosion. The heater is composed...
Open the catalog to page 2Catalogue Finned Tube Heaters type WD/GG-H (RVS) Our WD-L finned-tube air heaters are designed for application in the home, the office or in industry. Because of the overheating protection and the low surface temperature, they are especially suitable for all heating applications at an ambient temperature of up to 30°C. Due to the fact that the construction is in accordance with IP65, they are also suitable for damp places. Because of the low surface temperature, they are also suitable for damp places. Because of the low surface temperature, they are safe to use in places of easy access. The...
Open the catalog to page 3Catalogue Finned Tube Heaters type WD/GG-H (RVS) The types above are also available with different power and voltage SINUS JEViO
Open the catalog to page 4Catalogue Finned Tube Heaters type WD/GG-H (RVS) Stainless steel finned tube heaters are designed for industrial application. The heaters are suitable for use in corrosive areas such as: filling stations, water purification installations or storage areas. The fin material is made of stainless steel (AISI 409). Proofing IP66/IP67. Type TR is supplied with built-up thermostat, adjustable between +5°C to +30°C. Type ST is suplied with built-up step-controller: 1/3, 1/2 and full power.
Open the catalog to page 5Catalogue Finned Tube Heaters type WD/GG-H (RVS) Article number * Also available in 400 Volts Options for finned tube heaters type WD-H RVS Protection grid of aluminium perforated plate Type Suitable for: BS 500
Open the catalog to page 6Sinus is one of the pioneers in the field of explosion proof heating equipment, today we are still operating at the forefront. We manufacture according to ATEX as well as ECEx and EAC directives. For the production of Ex-proof equipment a PQAN (Product Quality Assurance Notification) is issued systems are also monitored by this organisation. Sinus-Jevi Electric Heating B.V. Aambeeld 19 1671 NT Medemblik +31 (0) 227 549 100
Open the catalog to page 7All Sinus-Jevi Electric Heating B.V. catalogs and technical brochures
-
IMH D-8530
6 Pages
-
IMH D-8800
4 Pages
-
IMH D-8680
8 Pages
-
IMH D-8640
8 Pages
-
Immersion Heaters (Standard)
10 Pages
-
Radiant Heaters
4 Pages
-
Heatray
3 Pages
-
Anti Condensation Heaters
14 Pages
-
Foot Heaters
3 Pages
-
Closed Tubular Heating Elements
10 Pages
-
Ceramic Heating Elements
6 Pages
-
Thermostats
5 Pages
-
Thermodyp Bath Heaters
4 Pages
-
Drum Heaters
3 Pages
-
Cartridge Heaters
34 Pages
-
Air Duct Heaters
6 Pages
-
Water Flow Heaters
6 Pages
-
Flame Proof Boilers
4 Pages
-
IMMERSION HEATING ELEMENTS
12 Pages
Archived catalogs
-
WATER FLOW HEATERS
6 Pages
-
DRUM HEATERS
12 Pages
-
THERMODYP BATH HEATERS
4 Pages
-
CARTRIDGE HEATERS
36 Pages