Fan Heater Explosion-Proof type FE2 FE2 heaters are CE Marked & ATEX Approved to Directive 94/4/EC for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries, petrochemical plants, pulp and paper mills, hazardous waste storage facilities, wastewater treatment plants, etc., where specific explosive gases or dusts maybe present. Sinus-Jevi Electric Heating B.V.

Catalogue Explosion Proof Fan Heater type FE2 FE2 heaters are CE Marked & ATEX Approved to Directive 94/4/EC for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries, petrochemical plants, pulp and paper mills, hazardous waste storage facilities, wastewater treatment plants, etc., where specific explosive gases or dusts maybe present. All FE2 heaters utilize the Vacucore® liquid-to-air heat exchanger. The induced vacuum within the sealed core provides greater efficiency, even distribution of heat across the face of the exchanger, and a faster...

Catalogue Explosion Proof Fan Heater type FE2 Horizontal Throw Maximum Mounting Height (to underside) Motor Speed Fan Diameter Shipping Weight Weights are an approximate maximum Specifications for 50 Hz models Model Nominal Wattage Phase Total Current Air Temperature Rise °F °C Article number To order a heater with a built-in room thermostat, add a ”T” suffix to model number. To order a heater with stainless steel cabinet add a ”U” suffix to model number.

Catalogue Explosion Proof Fan Heater type FE2 Horizontal Throw Maximum Mounting Height (to underside) Motor Speed Fan Diameter Shipping Weight Weights are an approximate maximum Specifications for 60 Hz models Model Nominal Wattage Phase Total Current Air Temperature Rise °F °C To order a heater with a built-in room thermostat, add a ”T” suffix to model number. To order a heater with stainless steel cabinet add a ”U” suffix to model number. Article number

Catalogue Explosion Proof Fan Heater type FE2 Mounting Kits Basic Mounting Kit The BMK is suitable for applications where the support arm can be bolted or welded directly to structural steel or concrete Model Approximate Shipping Weight Mounting kits are made of steel with a wet applied enamel paint. If the heater is installed on a structure that is to be transported, provide additional support for the heater during transit. The suspended weight should not exceed 300 lbs (136 kg). When ordering mounting kits, specify the type of kit requierd and the basic model of the heater to be mounted. Mounting...

Sinus is one of the pioneers in the field of explosion proof heating equipment, today we are still operating at For the production of Ex-proof equipment a PQAN (Product by Sinus-Jevi Electric Heating B.V.