DRUM HEATERS
12Pages

ELECTRIC HEATING

DRUM HEATERS The drum heating devices are meant to: - either to maintain the temperature of a product stored in a drum, in order to keep it viscous enough for its use - or to rise the temperature of a product stored in a drum, within a given period, in order to give it the required state for its use. The heating drum devices can be either movable or static, and can be fitted on metal drums or plastic drums. They can be used in different fields of activity such as: chemistry, petrochemistry, pharmaceutical industry, storage or viscous products, oil, resins, glue... According the application...

FLEXIBLE SILICONE BELT Flat flexible heater, 2.5 mm thick Low loading, allowing heating up of sensitive products (0.3 to 0.5 W/cm²) Heating circuit insulated by glass fibre layers with silicone rubber Double insulated construction, which does not require any earth cable Twin core rubber insulated power cable, neoprene sheated. Cable length: 2000 mm, except CEINT2: 2500 mm Temperature control with 20° to 120° adjustable bulb thermostat Note: the sensor measures the temperature between the surface of the belt and the drum, but not the temperature of the content of the drum Fixing method:...

TUBULAR ELEMENTS BELT Stainless steel belt, IP55 watertight, with tubular heating element Belt equipped with handles Connection box equipped with thermostat, compression gland for cable and ceramic terminal block for electrical connecting. Voltage 230V single phase, 400V single phase upon request • Dimensions of the connection box: Temperature control with 50° to 300° adjustable bulb and 42 capillary thermostat. (CEINT10 supplied without thermostat) Thermostats with other temperature range available upon request. Note: the sensor measures the temperature between the surface 106 of the belt...

MICA BELTS • Belts equipped with 2 handles. Available in 2 types: - Standard, insulated or not insulated - Watertight, insulated • Temperature control with 30° to 110° adjustable bulb thermostat. Note: the sensor measures the temperature between the surface of the belt and the drum, but not the temperature of • Sheet manufacturing: the content of the drum - Standard belt: aluminized steel Thermostats with other temperature range available - Watertight belt: heating elements under brass, IP54, upon request with aluminized steel clamping sheet • Belt supplied in 230/400V threephase,...

BELTS FOR PLASTIC DRUMS • Teflon coated polyester jacket, on the heated face. Outside jacket in Cordura, tear-resistant. Flexible heater is stitched into the jacket Glass filament blanket insulation Adjustable quick release buckles Temperature control with 0 - 90°C capillary thermostat 3 meters power cable, silicone insulated Manufacturing according to EEC, EMC and CE standards for low voltage Dimensions of the connection box: 65 x 114 x 63 mm thick. Please see drawing on page 2 Drum capacity* 25 liters • Options: Thermostat range: -5°C to +40°C Voltage: 110 V single phase * Estimated...

LEVEL DETECTOR • Applications: ° As a heating element does not have to work in a empty drum, the level detector enables to cut the power in case of critical liquid level in the drum ° It can also be used to avoid the emptying pump runs in neutral. Detector inserted inside the drum Pressure controller with commutation level preadjusted to 3 mbar (3 cm of liquid corresponds to a density of 1). IP65 enclosure protected against water ejections Immersion tube: 3 types of protection depending on the type of product and its working temperature: polypropylene (50°C), PVDF or stainless steel (120°C...

HEATING HAND TRUCK • Heating device mounted on a movable trolley (2 moving wheel + 2 fixed wheels) for metallic drum Stainless steel tubular heaters with loading 1 W/cm² IP44 regulation box included in the heating device. Temperature control with 30 - 110°C adjustable bulb thermostat. Other temperature ranges available. Connection with IP44 standard male plug: 3 phases + neutral + earth. (Female plug LEG 7000 available upon request). Heater supplied with: - removable lever arm - insulated blanket with straps Optional extra: 50 liters retention tub made of steel, fixed to the truck and...

Tailor-made ovens to heat up metallic drums and designed to receive 1200x1200 mm pallets according to your requirements. Inside and outside sheets in zinc coated steel Tubular heating elements specially designed according the product to be heat up The air is stirred up with a turbine in order to homogenize the temperature inside the whole oven Rock wool reinforced insulation All our ovens can be equipped with a temperature control device specially adapted to the application, from the self-regulating PID temperature controller, to the complete system designed to drive the oven and its...

Application: □ Temperature rise □ Heating up + temperature holding □ Temperature holding only Existing drum heating device: The manufacturing depends on compatibility between wattage, intensity, dimensions, connection, accessories and options.

Sinus Jevi Electric Heating B.V. Nijverheidsweg 2 1671 GC Medemblik The Netherlands Phone: +31 (0)227-549100 Fax: +31 (0)227-549150 E-mail: info@sinusjevi.com Web site: www.sinusjevi.com No rights can be derived from the text, illustrations and samples. We reserve the right to change materials, parts, assemblies, designs, colours, finishes etc. without prior notification.