CAN Bus Module VDB-100 RS-232 to OBDII Module Features Support OBDII, EOBD2 Microchip PIC18F2580 Firmware: Version 1.4 Baudrate 4800/9600/38400/115200/250K/500K Output Interface : RS-232 System System OBDII Decode Chip Microchip PIC18F2580 Firmware : Version 1.4 Support OBDII, EOBD2 Transfer Baud Rate Baudrate 4800 / 9600 / 38400 / 115200 / 250K / 500K Support ISO 15765-4 (CAN-B 125Kbps, 11bit ID, 29bit ID, started since 2003 in USA) Input Interface OBDII male 16pin Support ISO 15765-4 (CAN-C 500Kbs, 11bit ID, 29bit ID, started since 2003 in USA) Output Interface RS-232 Support ISO 14230-4 (KWP2000) Indicator LED OBD Tx (yellow) /Rx (green), PC RS232 Tx/Rx, Power (red) Support ISO 9141-2 Operating Voltage 12V, including over voltage /shortage protection Nominal Idle current 45mA Net Weight 120g Wire Length 175cm Power Supplied by car OBD socket (5 baud init. 10.4 kbaud, replaced by 14230-4 gradually, stopped in USA in 2008) Support SAE J1850 VPW (10.4 kbaud, replaced by 14230-4 gradually, stopped in USA in 2008) Support SAE J1850 PWM (41.6 kbaud, replaced by 14230-4 gradually, stopped in USA in 2008) Support SAE J1939 the Data link connector standard Ordering Information Part Number VDB-100-000 Description RS-232 to OBDII Module I n - Veh ic le Co m pu t i n g All specifications are subject to change without notice. All specifications are subject to change without notice.