AGTOS Cartridge Filter Units • Blast machines • Second-hand machines • Conveyor systems • Service and spare parts When developing our cartridge filter units, we set ourselves the goal of dedusting the blasting process efficiently and sustainably. All legal requirements are strictly adhered to or undercut and practical suitability is guaran

Highly efficient cleaning system solution for shot blast plants The cartridge filter system solutions from AGTOS have a modular design and are flexibly adapted to the required extraction volume flows of the individual. Like the AGTOS shot blast plants, the robust AGTOS cartridge filter units are designed for 24/7 use. They are used for the following blasting tasks, among others: ➜ Desanding ➜ Descaling ➜ Cleaning ➜ Optical blasting ➜ Roughening ➜ Hardening blasting Cost-saving and efficient The special AGTOS filter cartridges, differential pressure-dependent cleaning and efficient fans ensure...

With pressure surge cleaning, which takes place depending on the differential pressure measurement, a significantly better realisation of the cleaning process is achieved. The compressed air pulse reaches the inside of the dust-covered side walls more directly. These measures and properties result in a long service life for the cartridges with lower compressed air consumption. The fans are selected according to the latest energy efficiency classes. Schematic illustration of the filter cartridge cleaning process Filter process with protection The dust is extracted by means of negative pressure...

Automatic cleaning Special filter cartridges Our filter cartridges are cleaned using compressed air pulses during the operating time of the shot blast plant. The control of the cleaning intervals is fully integrated in the AGTOS software. Our filter cartridges consist of two parts: The filter cartridges are cleaned automatically by means of a limit value analysis (differential pressure measurement). In addition, manual cleaning can be carried out in the manual mode of the control unit. 1. body with flow material 2. reusable stainless steel support basket The material of the filter cartridges...

Individual disposal Special solutions Safe location There is a hopper underneath the filter, under which there are easy-to-change disposal containers. The following variants are available as standard (see below): Alternative versions, such as a pneumatic conveyor system for returning the dust particles to the customer’s collection container, are of course available as an option. The filters are designed for indoor installation, preferably close to the shot blast plant. Outdoor installation of the filters requires weather protection measures. Weather protection Dust discharge into big-bag, ......

Wide range of options Fire detection Depending on the intended use and load of the system solution on site, it is possible to monitor the filter unit using a fire detection system. The temperature and flying sparks are monitored. In addition, an acoustic and visual warning is given. Pipe shut-off claps It is also possible to supplement the air ducts with pipe shut-off claps. These are closed automatically when necessary and ensure separation of the raw gas and clean gas ducts to the filter. Cellular wheel sluice and sensor temperature monitoring in the filter hopper Cellular wheel sluice For...

User-friendly maintenance The filters are equipped with large, maintenance-friendly doors. The filter cartridges are clamped mechanically and centred in slots using quick-release fasteners. This ensures correct positioning and correct contact pressure. After unlocking the slide-in units, the cartridges are pulled out of the filter unit and replaced. Filter system with quick-release fastener Environmentally friendly and sustainable ➜ Our cartridge filter units are designed for long-term use (24/7 > 20 years). ➜ Efficient motors and low compressed air consumption reduce the basic requirements of...

We will be pleased to advise you in detail about the possibilities of using dry filter units in combination with shot blast plants. AGTOS cartridge filter units are available in the following standard sizes: Higher air volumes are achieved by a combination of the components listed above. You can find more information about our innovative filter technology here: www.agtos.com/technologie/ cartridge-filter-systems-for-blast-machines Gesellschaft fur technische Oberflachensysteme mbH GutenbergstraBe 14 48282 EMSDETTEN GERMANY