Sinterit Lisa 2

Product catalog summary

General Information
Status: September 2018
Technology: SLS (Selective Laser Sintering)
Laser System: Class 1, 5 W; λ = 808 nm
Dimensions: 690 x 500 x 880 mm (27.1 x 19.7 x 34.6 in)
Weight: 90 kg (198 lbs)

Print Volume
Max Diagonal Print Size: 316 mm (12.4 in)
Flexa High Accuracy Max Volume: 110 x 160 x 250 mm (4.3 x 6.2 x 9.8 in)
PA High Accuracy Max Volume: 90 x 120 x 230 mm (3.5 x 4.7 x 9 in)

Printer Parameters
Print Bed Size: 150 x 200 x 260 mm (5.9 x 7.9 x 10.2 in)
XY Accuracy: From 0.05 mm (0.002 in)
Layer Height Z: 0.075 - 0.175 mm (0.003 - 0.007 in)

Print Features
Min. Wall Thickness: From 0.4 mm (0.015 in)
Min. Detail Size: From 0.1 mm (0.003 in)
Hole Diameter: From 0.5 mm (0.019 in)
Moving Part Clearance: From 0.2 mm (0.007 in)

Additional Printer Features
Nitrogen Chamber: Built-in
Coupling: Pneumatic quick-coupling, Male Plug Nipple DN7.2
Average Nitrogen Consumption: 0.15 m³/hour

Materials
Powder PA11: 15-76 μm, average 40 μm
Powder PA12 Smooth: 20-100 μm, average 38 μm
Powder Flexa Black/Grey: 20-105 μm
Nitrogen Use Materials: In progress
Material Refreshing Ratio: 0 - 50% depending on material

Software
Software: Sinterit Studio 2018
Supported File Types: STL, OBJ, 3DS, FBX, DAE, 3MF
OS Compatibility: Microsoft Windows

Communication
LCD Screen: Capacitive, color
Touchscreen: 7 in
On-board Camera: Built-in
Connectivity: Wifi, USB port

Heating System
Independent Heated Components: Piston, Cylinder, Feed Bed, Print Bed
Max Temperature in Chamber: 192°C / 378°F

Power
Power Supply: 220-240 V AC, 50/60 Hz, 7 A or 100-130 V AC, 50/60 Hz, 15 A
Average Power Consumption: 0.9 kW
Maximum Power Consumption: 1.8 kW

Packaging
Contents: LISA 2 3D printer, Set of Accessories, Manual

Warranty
One year limited warranty

Note: Information provided is for reference and comparison only. Parameters are subject to change based on design and orientation.

Catalog excerpts

Sinterit Lisa 2 Benchtop SLS 3D printer - product specification Informations provided within this document are typical values for reference and comparison only. Parameters presented in this specification are subject to change. Final part properties may vary based on printed part design and print orientation.

Open the catalog to page 1

PRINT FEATURES HEATING SYSTEM Informations provided within this document are typical values for reference and comparison only. Parameters presented in this specification are subject to change. Final part properties may vary based on printed part design and print orientation www.sinterit.com

Open the catalog to page 2

0 Max size of print diagonally depend on the type of material. 1 Material refreshing ratio - percent of Fresh powder which has to be mixed with Used (unsintered) powder - to be reused to the next print. 2 Technical requirements to install Sinterit Studio Software: • Windows 7 or higher, • Minimum 500 MB of disc space, • Minimum 2 GB of RAM, • Graphics adapter compatible with OpenGL 3.0 or higher. Informations provided within this document are typical values for reference and comparison only. Parameters presented in this specification are subject to change. Final part properties may vary based...

Open the catalog to page 3

Sinterit Lisa 2

Sinterit Lisa 2

Catalog excerpts

All Sinterit catalogs and technical brochures