PA12 Smooth High surface quality Good quality to price ratio | Excellent surface quality and high level of recreated details | High chemical resistance Ultimate tensile strength General information Material type Granulation Color Material refreshing ratio 1 Compatible with ² Nylon 12 18 - 90 [μm] Navy Grey 26 [%] Charpy U- and V-notched impact testing Parameters Tensile Strength Elongation at Break Impact resistance (Charpy test / unnotched) Shore hardness in type D scale Internal procedure Thermal properties Melting point Printout density Applications Rapid prototyping, detailed objects, functional parts of highest quality, low volume production of low stress parts, working mechanisms. Charpy impact test results for specimens tested using pendulum of maximum energy of 50 [J], weight of 6.8 [kg] and length of 380 [mm]. Surface roughness Roughness parameter side surface Roughness of test speciments surfaces printed with layer thickness of 100 [μm]. High details, smooth surface, high chemical resistance, regular mechanical properties. 1 Material refreshing ratio - percent of Fresh powder which has to be mixed with Used (unsintered) powder - to be reused during next print. ² Available as part of the appropriate profile purchased. Information provided within this document are average values for reference and comparison only. Parameters presented in this specification are subject to change. Final part properties may vary based on printed part design and print orientation. 20201