PA 11 Onyx Material’s Technical Data Sheet Bio-derived nylon powder with great mechanical properties and impact strength. Ideal for elements working in difficult conditions. Compatible with: high mechanical strength high toughness dimension stability high ductility prototypes with great mechanical properties snap-fit designs end-use parts living hinges toolings holders General information Material type Software Test method Nylon 11 Sinterit Studio Basic Nitrogen needed Particle size Printout density Printout water absorption Mean particle size 1. Refresh ratio is the amount of refreshing powder that is required to be mixed after the printing with unsintered material. Information provided within this document are average values for reference and comparison only. All tests were performed with print samples from Lisa/Lisa Pro printers. Parameters presented in this specification are subject to change without notice. Final part properties may vary based on printed part design, print orientation and material handli

Mechanical properties Test method Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Shore hardness in type D scale Impact strength (Charpy method - unnotched) Thermal properties PN-EN ISO 179-1/1eU:2010 Test method Melting point Heat Deflection Temperature A at 1.8 MPa Information provided within this document are average values for reference and comparison only. All tests were performed with print samples from Lisa/Lisa Pro printers. Parameters presented in this specification are subject to change without notice. Final part properties may vary based on printed part design,...