PA 11 ESD
2Pages

PA 11 ESD Material’s Technical Data Sheet Bio-sourced nylon material with heat resistance and ESD functionality. Dedicated for electrostatic safe parts for electronic and automotive industries. Compatible with: antistatic properties better thermal properties dimension stability tools and testers in electronics production electronic casing automotive parts high-accuracy parts General information Material type Software Test method Nylon 11 Sinterit Studio Advanced Nitrogen needed Refresh ratio Colour Particle size Printout density Printout water absorption Mean particle size 1. Available on request. 2. Refresh ratio is the amount of refreshing powder that is required to be mixed after the printing with unsintered material. Information provided within this document are average values for reference and comparison only. All tests were performed with print samples from Lisa/Lisa Pro printers. Parameters presented in this specification are subject to change without notice. Final part properties may vary based on printed part design, print orientation and material handling.

Mechanical properties Test method Tensile Strength Tensile Modulus Flexural Strength Flexural Modulus Shore hardness in type D scale Impact strength (Charpy method - unnotched) Thermal properties PN-EN ISO 179- 1/1eU:2010 Test method Melting point Internal procedure Heat Deflection Temperature A at 1.8 MPa Heat Deflection Temperature B at 0.45 MPa Specific volume resistance Specific surface resistance Test method 3. Tested on virgin powder. Information provided within this document are average values for reference and comparison only. All tests were performed with print samples from...