SINTERIT LISA PROProduct specification Benchtop SLS 3D printer • bigger print volume • built-in nitrogen chamber • compatible with many materials • a possibility of using 3rd party powders • no calibration needed after delivery General information Laser system Max size of print diagonally 0 316 [mm] (12.4 [in]) Flexa/TPE - high accuracy max print volume PA - high accuracy max print volume Printer parameters Size of Print Bed 150 x 200 x 260 [mm] (5.9 x 7.9 x 10.2 [in]) XY accuracy from 0,05 [mm] (0.002 [in]) The layer height Z (min - max) 0,075 - 0,175 [mm] (0.003 - 0.007 [in]) Min. wall thickness from 0,4 [mm] (0.015 [in]) Min. detail size from 0,1 [mm] (0.003 [in]) Hole Diameter from 0,5 [mm] (0.019 [in]) Moving Part Clearance from 0,2 [mm] (0.007 [in]) Additional printer features Nitrogen chamber Built-in Coupling installed in Lisa Pro Pneumatic quick-coupling Male Plug Nipple DN7.2 Average Nitrogen consumption 0,15 [m3 /hour] SINTERIT www.sinterit.com Information provided within this document are typical values for reference and comparison only. Parameters presented in this data sheet are subject to change. Final part properties may vary based on printed part design and print orientation. Material during tests - parameters are subject to change. Sinterit LISA PRO data sheet, Page 1/2

Software Software ² Supported file types OS compatibility Sinterit Studio 2019 Open STL, OBJ, 3DS, FBX, DAE, 3MF Microsoft Windows Communication LCD screen Touchscreen On-board camera Capacitive, color 7 [in] Built-in Heated: piston, cylinder, Feed Bed, Print Bed Heating system Power Power supply Average power consumption Maximum power consumption Packaging Package contains LISA PRO 3D printer + Set of Accessories + Manual One year limited warranty Warranty Software Versions Sinterit Studio Sinterit Studio Open Sinterit Studio Profiles Sinterit Studio Advanced Flexa Grey Flexa Black Flexa Soft...