Flexa Black
1Pages

Flexa Black w Flexible and detailed Excellent surface finish and feature details | Adjustable hardness | 100% reusable General information Tensile testing Material type TPU Granulation 20-105 [pm] Color Black Material refreshing ratio10 [%] Compatible with 2Lisa & Lisa Pro Parameters Tensile Strength 5.0 [MPa] PN-EN ISO 37:2007 Elongation at Break 155 [%] PN-EN ISO 37:2007 Shore hardness in type A scale 80 / 90 3 PN-EN ISO 868:2005 Softening point (Vicat method type A50) 82.3 [°C] PN-EN ISO 306:2014-02 Melting point 160 [°C] Internal procedure Flexible parts or objects, medical devices, fantoms, cable jacketing. While the tensile stress does not exceed 2.3 [MPa], after load release, the test specimens retain their shape, with no external damage observed (e.g. fractures). The test specimens fracture when a max tensile stress of 5 [MPa] is applied. While the compressive stress does not exceed 12 [MPa], after load release, the test specimens retain their shape, with no external damage observed (e.g. fractures). 1 Material refreshing ratio - percent of Fresh powder which has to be mixed with Used (unsintered) powder - to be reused during next print. FLEXA has 100 [%] of usability. 2 Available as part of the appropriate profile purchased. 3 Depending on printing settings. Information provided within this document are average values for reference and comparison only. Parameters presented in this specification are subject to change. Final part properties may vary based on printed part design and print orientation.