Hydrostatic support servo actuator, servo hydraulic system, working condition reproduction simulation system, high-quality servo hydraulic components and system integrator

Introduction of German Expert Serving as Vice Chairman & Technical Director of Sino-CMT (Changchun) Technology Co. Ltd, Klaus Biehl is currently a professor of materials science and service strength science at department of Engineering Sciences, Rhein-Main University of Applied Sciences. Prof. Biehl has extensive knowledge and experience in material science & structural strength. Prof. Biehl graduated from Technical University Darmstadt in Germany and received a doctorate degree in material science in 1989. He had continually worked at Carl Schenck and 1ST (Instron-Schenck Testing Systems) and...

About SinoCMT MCT (MatCompTest GmbH) was established in Germany in January, 2005. The principle founder, Prof. Biehl had worked long time at worldwide well-known testing company Carl Schenck, later on 1ST (Instron-Schenck Testing Systems). More than three decades in the testing field, Prof. Biehl possesses comprehensive experience & solid knowledge in design, production and development of structural test systems. The products are widely applied in automotive, locomotive, aerospace, rubber industries and material R&D institutions in Europe. Sino-CMT (Changchun) Technology Co., Ltd. (Sino-CMT)...

Hydrostatic Bearing Linear Actuator Special Model Servo Hydrostatic Bearing Actuator & Bearing products. Operating Condition Reproduction Simulation System

SinoCMT Hydrostatic Bearing Linear Actuator Summary Hydrostatic bearing actuator has no sealing gaskets. With the help pf special designed hydrostatic bearing unit, the piston rod automatically regulates itself that ensures constantly alignment between piston rod and cylinder housing and central guiding. While bearings center the piston, all sliding surfaces in actuator are separated by oil film under pressure; this oil film in hydrostatic bearings exists before piston moves and is maintained even under lateral force so to exclude friction & wear. Hydrostatic bearing actuator offers much high...

SinoCMTML series Linear Hydrostatic Bearing Actuator • Linear actuator is double-acting cylinder with equal areas in the two chambers • Test frequency: 0.01~400Hz; • Maximum speed: 6m/s for standard versions; ML series Linear Hydrostatic Bearing Actuator specifications Nominal load (kN)

SinoCMT 02 ML Series Hydrostatic Bearing Linear Actuators Standard ML series Linear Hydrostatic Bearing Actuator

SinoCMTSelection of Standard ML SeriesStatic Pressure Support Servo Linear Actuator Test frequency: 0.01 -200Hz; Nominal pressure: 21MPa or28MPa; Nominal angle: ±50°; Special design available upon request. The rotary hydrostatic actuator adopts a double-blade structure. There are radial and axial static bearings; both the piston moving blade and the cylinder static blade are plastic-coated. There is no mechanical seal ring, no friction, no stick resistance, no wear under normal working conditions. It has the same advantages and characteristics as the linear cylinder, suitable for dynamic high-frequency...

SinoCMT Special Model Servo Hydrostatic Bearing Actuator & Hydrostatic Bearing products MLD Series Single-acting Hydrostatic Bearing Actuator The single-acting hydrostatic bearing actuator, offering big load capacity and extended stroke, is suitable for static test applications for analysis of static mechanics, stability, safety, endurance and lifespan of large civil engineering components and structures. With sustainable and rapid economic growth, it is entering a new era for various major civil engineering construction projects. The newly developed single-acting hydrostatic bearing actuator...

SinoCMTMLQ Series Nested Hydrostatic Bearing Actuators Nested Hydrostatic bearing actuator is a double-load servo actuator. The piston rod of external actuator takes into account the cylinder block of internal actuator. Both internal and external actuators adopt the technology of hydrostatic bearing clearance seal. Compared with standard hydrostatic bearing actuator, this nested hydrostatic bearing actuator contains four oil chambers, and both internal and external actuators can achieve high-frequency reciprocating linear motion. The servo actuator is manufactured and tested according to German...

SinoCMT Control SystemController MCT The MCT control system is a new generation control system developed by our company for the integration of domestic advanced technology and talents. Adopting the 6U horizontal card structure in the CPCI international standard, the chassis design is 4U chassis height, and the overall width is designed according to the 19-inch standard chassis, which can be installed in a 19-inch standard computing cabinet. The advantage is that the overall design is based on standards, and all sizes, ventilation, and connection slots have strict design specifications. The chassis...

SinoCMT MCT-04 The controller integrates a real-time processor, FPGA and I/O. The processor consists of a 667MHZ dual-core ARM Cortex-A9 embedded processor and Xilinx Artix-7 FPGA dual processor (CPU system, the operating frequency can reach up to 40MHZ (25nS operation speed), and provides for embedded operation 512MB DRAM (memory) and 512MB nonvolatile memory for program storage and data recording. Adopt full closed-loop PID control algorithm, the control frequency of a single control channel is 5klHz. The configuration sampling rate is 200kS/sAD analog-to-digital conversion chip; 336kS /s conversion...

The controller integrates a real-time processor, FPGA and I/O. The processor is a dual-processor (CPU) system consisting of a 1.91 GHz quad-core CPU processor and FPGA chip produced by Xilinx Kintex-7325T. The operating frequency can reach up to 40MHZ (25nS operation speed), and provides for embedding 2 GB DRAN (memory) and 16GB MB non-volatile memory for program storage and data recording. It adopts a fully closed-loop FP1D control algorithm, and the control frequency of a single control channel is 5 kHz. The configuration sampling rate is 250 kS/sAD Digital conversion chip; DA digital-to-analog...