STANDARD SPECIAL TEST SYSTEM STANDARD SPECIAL TEST SYSTEM B Servo electronic dynamic and static testing machine | Electric servo actuator material testing Software screenshot Overview Electric servo actuator is mainly used in tensile and compression test systems for components and materials. It can provide dynamic and static test forces in closed-loop control. The loading frame can be flexibly built to realize a variety of loading and installation forms. It is an ideal product for scientific research institutions and laboratories. Servo electronic dynamic and static testing machine is loaded by electric servo actuator, and is widely used in the field of material testing. This equipment is mainly used for materials in dynamic load fatigue and static tensile and compression strength evaluation test, new design, changes in craft, changes in material, source identification, product quality sampling, and other situations that may cause significant changes in fatigue. Electric loading form; environmentally friendly; clean appearance; no noise or pollution; High precision and stable movement of Displacement loading and force loading. The calibration device is easy to operate and accurate in measurement; ^03| Specifications and Control mode: two closed control loops of force and displacement; the control mode can switch smoothly and realize a variety of waveform loading. The dynamic electric servo loading cylinder is equipped with an automatic grease injection machine to ensure sufficient lubrication of the friction part, so that the product has a ultra-long life. main parameters Product characteristics Electric loading form, can replace a part of the hydraulic servo fatigue testing machine; The equipment has high coaxiality and can meet the coaxial requirements of American standard ; The clamping tool adopts wedge sleeve structure to ensure reliable clamping; Various environmental devices can be added; The calibration device is easy to operate and accurate in measurement; Cross beam locking torque, adjustable

STANDARD SPECIAL TEST SYSTEM STANDARD SPECIAL TEST SYSTEM material testing Double axis universal material testing machine j03| Product characteristics j04| Specifications and main parameters Overview The material double axis loading mechanical performance test system is mainly used for the double directions static tensile or compression test of composite materials, ceramics, rubber, etc. The system has two control methods of force and displacement. ^02| Product pictures Model

Cantilever bending fatigue testing machine material testing 01 Overview Standards and methods Cantilever bending fatigue testing machine is a kind of test equipment for cantilever beam bending fatigue for different material samples(plates, bars). It measures and observes the root stress state and cracking state. The system has two control methods of force and displacements. Specifications and main parameters Product characteristics The testing machine is mainly composed of the host frame, linear motor actuator, force sensor, fixture, calibration device, electric control cabinet, control system...

STANDARD SPECIAL TEST SYSTEM STANDARD SPECIAL TEST SYSTEM & Electro hydraulic servo horizontal^ tensile testing machine hydraulic material testing 02 Specifications and main parameters Electro-hydraulic servo horizontal tensile testing machine is mainly used for tensile tests of metal materials(pipes, plates, bars, steel wire ropes), such as tensile resistance strength performance test, long-term creep test, fatigue life test and breaking test, etc Meet some of the tests and test methods shown below: JJG 556-2011 Verification Protocols of Axial Direction Force Augmentation Fatigue Testing Machine...

STANDARD SPECIAL TEST SYSTEM STANDARD SPECIAL TEST SYSTEM material testing Electric loading anti-seismic support and hanger fatigue test bench Product pictures J3l| Overview The seismic support and hanger fatigue test bench is mainly used to test the indexes such as fatigue performance of seismic support. Applicable to the various mechanical performance test systems in the standards GBT37267-2018 Architecture Seismic Support and Hanger General Technical Requirements and GB/T38053-2019 Prefabricated Support and Hanger General Technical Requirements Software screenshot Specifications and main parameters...