3/2-way Solenoid Valve

Product catalog summary

Overview: This document provides technical specifications for the 3/2-way solenoid valves (models MV314-0, MV314-3, MV312-0, MV312-3) used for controlling pneumatic knockers. It includes details on design, electrical requirements, and operational parameters.

Design and Components: The valves are indirect solenoid actuated soft seal spool valves. They include an actuating magnet and connector, with housing made of aluminium, a plastic pilot flange, and NBR seat seal.

Electrical Specifications: The valves operate at either 230V AC, 50Hz or 24V DC, with power consumption of 8.5 VA or 4.8 W respectively. They are protected under IP65 when used with the appropriate connector.

Connector Details: The connector follows DIN EN 175301-803 Form B standards, measuring 22 mm with a 2P+E configuration and M16x1.5 threading.

Installation and Medium: The valves can be mounted in any position, preferably vertical, and are designed for use with compressed, filtered air, either lubricated or non-lubricated. The operating temperature range is -15°C to +50°C, and the air must be moisture-free below +2°C to prevent freezing.

Port and Flow Specifications: The MV314 models have a port size of G ¼” with a nominal size of 6 mm, operating pressure from 1 to 10 bar, and a flow rate of 1200 l/min. The MV312 models have a port size of G ½” with a nominal size of 12 mm, operating pressure from 2 to 10 bar, and a flow rate of 3000 l/min.

Physical Characteristics: The weight of the MV314 models is 0.5 kg, while the MV312 models weigh 0.8 kg.

Contact Information: Singold Gerätetechnik GmbH, located in Schwabmünchen, Germany, can be contacted via phone at +49 (0) 8232 / 710 36 or email at [email protected]. More information is available on their website www.singold.tech.

Catalog excerpts

3/2-way Solenoid Valve For controlling pneumatic knockers MV314-0, MV314-3, MV312-0, MV312-3 Dimensional drawing MV314 (G1/4") Dimensional drawing MV312 (G1/2") (for Pneumatic Knockers K 63, K 80, K100 and (for Pneumatic Knockers K125, K160 and Pneumatic Distance-Knockers QJ 63, QJ 80, QJ100)_Pneumatic Distance-Knocker QJ125) Design type Indirect solenoid actuated soft seal spool valve singold item-No. Power consumption Protection class Mounting position Media / Ambient temperature Port size Nominal size As necessary, preferably vertical Compressed, filtered air; lubricated or non-lubricated Operating pressure Flow direction 0,8 kg Housing: Aluminium, pilot f ange: Plastic, seat seal: NBR Tel.: +49 (0) 8232 / 710 36 singold geratetechnik gmbh, 86830 Schwabmunchen, Germany E-Mail: [email protected] Website: www.singold.tech

Open the catalog to page 1

3/2-way Solenoid Valve

3/2-way Solenoid Valve

Catalog excerpts

All Singold gerätetechnik gmbh catalogs and technical brochures