Data sheet series STL

Product catalog summary

Overview: The STL series water-operated temperature control units are designed for a wide range of applications, particularly in injection moulding technology. These units offer a broad capacity and temperature range, providing basic temperature control options. They are equipped with high-quality components, making them cost-efficient and affordable.

Standard Equipment:

General: The units feature a rugged, powder-coated sheet steel housing with automatic filling and replenishing capabilities.
Hydraulics: The hydraulic equipment is made from stainless steel and non-ferrous metals, featuring an Incolloy heater, high-quality pump materials, leak stop with TK6 and TKN6, and dirt traps in return water.
Electric and Control Equipment: Includes an SBC controller, heating control by solid state relay, a switch box to IP54, and a cable connector without a plug.

Options: Additional options are available upon request from SINGLE Temperiertechnik GmbH.

Technical Specifications:

Temperature Range: Maximum temperature range is 90°C for models TK6, TKN6, TKS6, TKSG6 and 150°C for models K6, KN6, KS6.
External Volume: Ranges from 13 to 240 liters depending on the model.
Heating Capacity: Varies from 4.5 kW to 72 kW across different models.
Cooling Capacity: Ranges from 23 kW to 250 kW, depending on the model and conditions.
Flow Rate: Maximum flow rate ranges from 27 to 240 liters per minute.
Pressure: Maximum pressure ranges from 3.8 to 6 bar.
Pump Motor Capacity: Varies from 0.25 kW to 1.5 kW.
Connections: Circulating media connections range from 14 mm to G 1", and cooling water connections are hose spouts ranging from 14 mm to 28 mm.
Dimensions and Weight: Dimensions vary by model, with lengths from 590 mm to 1300 mm, widths from 265 mm to 480 mm, heights from 480 mm to 1360 mm, and weights from 50 kg to 200 kg.

Catalog excerpts

Water-operated temperature control units from the STL series provide a wide capacity and temperature range and basic temperature control options particularly for injection moulding technology but also for a variety of other applications. Equipped with high-quality components, they are cost-effi cient and inexpensive. Standard equipment General • Rugged, powder-coated sheet steel housing • Automatic fi lling and replenishing Hydraulics • Hydraulic equipment stainless steel / non-ferrous metals • Incolloy heater • High-quality pump materials • Leak stop with TK6 and TKN6 • Dirt traps in return water Electric and control equipment • SBC controller • Heating control by solid state relay • Switch box to IP54 • Cable connector without plug Options upon request SINGLE Temperiertechnik GmbH, Ostring 17-19, 73269 Hochdorf/Germany Tel.: +49 (0)7153/3009 - 0, Fax: +49 (0)7153/3009 - 50, www.single-temp.de SINGLE Compact water-operated temperature control units STL series

Open the catalog to page 1

Data sheet series STL

Data sheet series STL

Catalog excerpts

All SINGLE Temperiertechnik catalogs and technical brochures

Archived catalogs