The extraordinarily compact mini water-operated temperature control units from the M series are specially designed for small and laboratory applications with relatively low capacity requirements. If required, they can be combined to form multi-circuit temperature control systems. Standard equipment General • Rugged, powder-coated sheet steel housing • Automatic fi lling and replenishing Hydraulics • Hydraulic equipment stainless steel / non-ferrous metals • Incolloy heater • High-quality pump materials • Direct cooling without heat exchanger • Dirt traps in return and cooling water supply line Electric and control equipment • SBC open and closed-loop control unit • Heating control by solid state relay • Switch box to IP54 • Cable connector without plug Options • Indirect cooling with heat exchanger (type M2 and up) • Intelligent SC controller with colour display • Pneumatic cooling water valves • Up to 120 °C operating temperature, suffi cient cooling water pressure provided • Connections for various analogue and digital electric interfaces • Virtually unlimited hydraulic and electric options • Ecotemp system for cyclic temperature control SINGLE Temperiertechnik GmbH, Ostring 17-19, 73269 Hochdorf/Germany Tel.: +49 (0)7153/3009 - 0, Fax: +49 (0)7153/3009 - 50, www.single-temp.de SINGLE Mini water-operated temperature control units M series

T T T Cooling water supply Magnetic valve Cooling water outlet from process Tank to process Level monitoring Safety valve Dirt trap Temperature sensor Heater Pump M series Structural units M1 M2 M3 M4 M6 Temperature range °C 90 90 90 90 90 Heating capacity kW 1.5 1.5 3/4.5 4.5/6 6/9 Cooling capacity (80 °C outlet/15 °C cooling water) kW 17 17 35 35/58 35/58 Max. fl ow rate l/min 14 27 27 60 60/100* Max. pressure (max. values of the characteristic) bar 3.5 4.5 4.5 6 6/8.5* Pump motor capacity kW 0.12 0.25 0.25 0.75 0.75/2.8* Connections circulating media FPT G 1/4" G 3/8" G 1/2" G 1/2" G 3/4"...