MODEL 106-GE / 206-GE

Product catalog summary

Product Overview
The document discusses the Model 106-GE / 206-GE main valves with grooved ends, designed for use with grooved Iron Pipe Size (IPS) Pipe Coupling Products. These valves offer the convenience of grooved end piping and fittings in automatic control valves, suitable for applications such as municipal water, wastewater, fire protection, and plumbing. Available sizes range from 2 inches (50 mm) to 8 inches (200 mm).

Key Features
- Easy system and equipment access for alignment and installation.
- Enhanced flexibility with expansion, contraction, and deflection.
- Seismic stress absorption.
- Elimination of unions.

Valve Data (US Units)
The document provides detailed dimensions and specifications for the valves, including lay length, centerline to bottom, width, height, body port tapping, stem cap plug, cover port tapping, valve stroke, displaced bonnet volume, approximate shipping weight, flow capacities, and maximum pressure ratings. All valves are rated at 400 psi, with an option for 600 psi upon request. The maximum temperature is 180°F.

Valve Data (Metric Units)
Similar specifications are provided in metric units, with maximum pressure ratings of 27.6 Bar and an option for 41 Bar. The maximum temperature is 82°C.

Ordering Instructions
Instructions for ordering are referenced on page 244 of the document.

Catalog excerpts

MAIN VALVES - OPTIONS MODEL 106-GE / 206-GE GROOVED ENDS Convenient system and equipment access for ease of alignment and installation Improved flexibility with expansion, contraction and deflection Seismic stress absorption Eliminates unions PRODUCT OVERVIEW For use with grooved Iron Pipe Size (IPS) Pipe Coupling Products, grooved ends allows you to benefit from the simplicity and convenience of grooved end piping and fittings in an automatic control valve. There are a wide range of applications where grooved ends are relevant, but typical applications include municipal water, waste water, fire protection and plumbing. Grooved ends come in the following size ranges: • 2 in / 50 mm – 8 in / 200 mm • Angle ranges from 2 in / 50 mm – 3 in / 80 mm Standard cut groove specifications for steel and other IPS pipe will apply, unless otherwise spec

Open the catalog to page 1

'Valves rated and stamped 400 psi as standard. Valves rated and stamped 600 psi on request.

Open the catalog to page 2

'Valves rated and stamped 27.6 Bar as standard. Valves rated and stamped 41 Bar on request. ORDERING INSTRUCTIONS Refer to page 244 for the order form and ordering instructions.

Open the catalog to page 3

MODEL 106-GE / 206-GE

MODEL 106-GE / 206-GE

Catalog excerpts

All Singervalve catalogs and technical brochures