ULTRASONIC TECHNOLOGY

The ultrasonic aerosol generator produces droplets or particles of controlled particle size: the higher the ultrasonic frequency, the smaller the aerosol droplets (a few urn). In the frequency range of between 20 kHz and 80 kHz, the liquid circulating via the central orifice in the sonotrode is sprayed as micro-droplets in contact with the vibrating surface. The product to be sprayed is brought through the rear of the nozzle by gravity The aerosol is controlled repetitively by adjusting the ultrasonic power and the flow rate. This spraying technology has less environmental and economic impact...

As the use of an ultrasonic solution is relatively complex and specific to each requirement, our service includes support that is tailored to the specific expectations of our clients and to the ■ Drafting the specifications in partnership with our customers to ■ Custom design and adaptation of equipment described below ■ Monitoring of the equipment's user and configuration protocols. ■ Air control in confined area

The nozzle is used for local spraying or is incorporated into a fogging system with multiple nozzles to treat a larger area. Water characteristics The nozzle is controlled by an inside 150 generator in the NexTaen range.

The table base is designed to produce a mist in a duct or laboratory reactor, where the sprayed particles can be scattered and/or dried. The base is controlled by an inside 150 generator in the NexTgen range.

Synergie Park 7, avenue Pierre et Marie Curie e-mail : [email protected]