*mydirectindustry

SV

Product catalog summary

Overview: The document discusses the benefits and specifications of using ultrasonic vibration technology in sieving processes. The primary goals are to increase throughput, break agglomerates, reduce product surplus, and ensure permanent self-cleaning of the sieve mesh.

Specifications: The ultrasonic vibration technology reduces the friction coefficient between particles, enhancing the flow throughput of powders. It combines with the traditional mechanical movement of a vibrating sieve, with the ultrasonic transmitter installed at the center of the sieve mesh. An ATEX version of the equipment is available as an option.

Equipment and Control: The ultrasonic transducers are managed by NexTgen range generators. When paired with NexTgen Advanced software, the system allows for optimal process traceability and periodic transducer diagnostics.

Performance Data: The document provides a comparison of throughput with and without ultrasounds for different types of powders:

Silica (45 µm): From 2 kg/h to 18 kg/h
Mineral pigments (80 µm): From 300 kg/h to 1200 kg/h
Toner powder (140 µm): From 270 kg/h to 1300 kg/h

Technical Details: The system operates at a frequency of 30 kHz with an output of 150 W. The materials used include titanium and stainless steel, with an ATEX option available.

Contact Information: SinapTec, SYNERGIE PARK, 7 avenue Pierre et Marie Curie, 59260 Lezennes, FRANCE. Phone: +33 (0)3 20 61 03 89, Email: [email protected]

Catalog excerpts

SIEVING The ultrasonic vibration reduces the friction coefficient between the particles and thus increases the flow throughput of the powders. The ultrasonic vibration is combined with the classic mecanical movement of a vibrating sieve. The transmitter of ultrasonic vibrations is installed in the center of the sieve mesh. As an option, this equipment can also be proposed in ATEX version. Increase the thoughput of the sieve Produce breaking of agglomerates Decrease the proportion of product surplus Permanent self-cleaning of the sieve mesh

Open the catalog to page 1

The ultrasonic transducers are controlled by our generators from the NexTgen range. Combined with the NexTgen Advanced software, optimum traceability of the process and a periodical diagnosis of the transducers are made possible. SinapTec SYNERGIE PARK, 7 avenue Pierre et Marie Curie, 59260 Lezennes, FRANCE +33 (0)3 20 61 03 89 [email protected]

Open the catalog to page 2

SV

SV

Catalog excerpts

All SinapTec catalogs and technical brochures

Archived catalogs