RELIABILITY BEYOND MEASURE Technical Data Sheet Simpson 5002 5003 5005 5006 Bluetooth series of new multimeters is made for professional use that offers safety, high resolution, large range count, reliability, ruggedness, a complete tool for test automation and is equipped with more than 30 different measuring functions. Special Features True RMS Digital Multimeter Data logger & View function (up to 32000 readings) Plug and Play USB connectivity with PC 100kHz bandwidth for voltage measurement 1kHz Low Pass Filter mode GO-NO-GO function VAC with 1MOhm impedance 4-20mA/0-20mA scale type measurement Single fuse for mA & A Adjustable square wave output Temperature measurement with J, K, Pt100 & Pt1000 sensors External power adapter for long hours of measurements Selectable clamp ratio for current measurement Conductance Measurement Frequency / Time Period Measurement

Application The 5002...5006 series of new multimeters is made for professional use that offers safety, high resolution, large range count, reliability, ruggedness, a complete tool for test automation and is equipped with more than 30 different measuring functions. Current measurement with clamp sensor Trouble shooting a branch circuit with dead or disconnected circuit is made easy with VAC1M. Low impedance VAC1M measurement helps eliminating error readings resulting from ghost voltages caused by long wires that share a common conduit. Measurement with various clamp sensors is possible, which...

Simpson 5002...5006 Bluetooth True RMS measurement with high crest factors External Power Adapter (DC Jack) Accurate true RMS measurement of distorted waveform with crest factor CF between 1 to 10. The external power supply adapter helps in conserving battery while performing long hours of measurements. When DC jack is connected batteries inside DMM are electronically disconnected, and reconnected in absence of mains, hence there is no need of removing the battery when using the power adapter. Data Logging DMM 5005/5006 offers continuous data logging of up to 32000 readings with real time stamping....

Model Wise Functional Overview Functions/Features Voltage VDC (Ri>9MΩ) Voltage VAC TRMS (Ri>9MΩ ) Voltage LoZ VAC TRMS (Ri=1MΩ ) Voltage VAC TRMS (Ri>9MΩ) LPF 1kHz Voltage LoZ VAC TRMS (Ri=1MΩ) LPF 1kHz Voltage VACDC (Ri>9MΩ) High impedance, high bandwidth mVmeasurement Bandwidth VAC & mVACDC Frequency Measurement Duty cycle % Voltage level measurement dB,dBu,dBm Resistance Conductance measurement Continuity test (I const = 1 mA) Diode measurement (I const = 1 mA) Temperature measurement (TYP J,TYP K) Temperature measurement (PT100,PT1000) Capacitance measurement Current ADC Current AAC+DC TRMS...

Technical Specication Voltage Mea sure me nt Function Me a suring Input Re solution Ra nge Impe da nce Intrinsic Unce rta inty under Reference Condition ±(…% of the rdg.+…Digits) DC 1 ) Specied Accuracy is valid as of 3% of the measuring range.With Short- circuited test probes: residual value of 1 to 30 d at zero point due to the TRMS converter. 2 ) At 0°C to 40°C (AccuracyRange) 3 ) In VAC measurement, Frequencywill be shown above 10% of the present range, except for 1000V & 60mV range i.e. 25% & 50% respectively. 4 ) Frequency Inuence upto 10kHz. 5 ) Frequency response up to 50 kHz 6 ) Frequency...

Current Intrinsic Uncertainty under Reference Condition ± (…% of the rdg . +…Digits) Votlage Drop Approx. Measurement Measuring Resolution Range Function Inuence Quantity Ove rload 2) Capacity Value Accuracy Simpson 5006 ± (…% of the Others rdg +…Digits) 1) Specied Accuracy is valid as of 3% of the measuring range.With Short-circuited test probes: residual value of 1 to 30 d at zero point due to the TRMS converter. 2) At 0°C to 40°C (AccuracyRange) 3) Off time 30 min and TA= 40°C 4) With Zero Balancing 5) Frequency response is valid from 10% to 100% of range Resistance, Diode, Continuity Intrinsic...

Capacitance Measurement Measuring Resolution V Max O Function Range Intrinsic Uncertainty ± (% of therdg +Digits) 1 ) At 0 °C to 4 0 °C (Accuracy Range) 2 ) Applies to measurements at lm capacitors and battery operated : 3 ) Measurement of Capacitance will be more accurate after removal from device undertest 4 ) With Zero Balancing Square Wave Out Output Duty Cycle 0.1% x output frquency + 2 counts of DMMdisplay 0.2% of Full scale 1) 1) For signal greater than 1kHz, add 0.2% per kHz to the accuracy 2) In Multiple of 10 Inuence Error Inuence Quantity mA/AAC, ACDC Relative humidity 1) With Zero...

Inuence Quantity Inuence Quantity Common Mode interference voltage Normal Mode inter ference rati o Measuring Ranges Noise quantity max. 1000 V ~ 50-60 HZ sinusoidal Noise quantity V ~ Value of the measuring range at a time Max. 1000V~, 50Hz, 60Hz Sinusoidal Applicable Regulations & Standards EMC Immunity IEC 61000-4-2 : 8 KV atmosphere discharge, 4 KV contact discharge IEC 61000-4-3 : 3 V/m Pollution degree: Installation category: 1000 V CATIII / 600 V CATIV, 600V CATII for DMM 5003 High Voltage Test Test & Procedure Battery Battery Voltage Battery type 2 X 1.5 V Cells (LR6 Battery) Alkaline...

Crest Factor Crest Factor Additional error caused by signal’s crest factor: 1 < CF < 3: 1% R+ 30D 3 < CF < 10: 3% R Curve 1 : Range from 0.06V to 60V, 0.6mA to 60mA, 6A Curve 2 : Range 600V 600mA Curve 3 : Range 1000V 10A Note: With Unknown Waveform (CF >2), measurement should be made with manual range selection. R = Reading D = Digit Internal Clock Time Format Resolution Temperature Inuence Display LCD display eld 67 mm X 54 mm with digital display, analog scale and with display of measurement unit, and Various special functions. Analog Display: Scaling: Over range Display (Digital): Polarity...

Fuse Fuse FF (UR) 16 A/ 1000 V AC/DC; 10 mm x 38 mm ( Simpson 5005 & 5006) FF (UR) 1.6 A/ 1000 V AC/DC ; 6.3 mm x 32 mm ( Simpson 5002) Switching Capacity 30 kA at 1000 V AC/DC (Simpson 5005 & 5006) 10 kA at 1000 V AC/DC (Simpson 5002) Android Application Simpson 5006 Class 2 Bluetooth which is integrated in the instrument achieves transmission ranges of up to 10m. Recommended Screen Size: 4.7” to 7" with resolution 1280 x 720p & above. Android Version: 4.0 & above. Meter Setup Parameter can be congured through application. Measured Parameter can be logged in Excel format on mobile’s default...