RELIABILITY BEYOND MEASURE Technical Data Sheet Simpson 4005/ 4006 is a rugged, dual display, 6600 count, portable multimeter with wide selection of measurements. The other key features include MIN/MAX, Data Hold and Peak Hold Special Features Direct and alternating voltages from 100μV ... 1000V Direct and alternating currents from 10μA ... 10.00A Resistance from 100mΩ... 60.00MΩ Capacitance from 1pF ... 40.00 mF with zero correction Frequencies from 10.00Hz ... 10MHz Diode measurement and continuity testing Hold measurement . Relative measurement Duty cycle (%) measurement Temperature measurement with K type Thermocouple Peak value measureme

Application Auto Power OFF (APO) digital multimeters are suited for universal, general applications in the electrical and electronics radio and television service, training and education. Multimeter has a default auto power off function. If the Meter is idle for more than the 15 minutes, the meter automatically turns the power off. Root mean square value with distorted wave form (for 4006 only) Measuring principal employed permits the measurement of root mean square value (TRMS) of AC quantities regardless of wave form. By pressing the HOLD/ON key, the currently displayed Measurement value can...

Reference conditions for Accuracy Reference Temperature Relative Humidity Waveform of measured quantity Input frequency Battery Voltage Applicable regulations and standards EMC Immunity IEC 61000-4-2 : 8 KV atmosphere discharge, 4 KV contact discharge IEC 61000-4-3 : 3 V/m Pollution degree: Installation category: 1000 V CATIII / 600 V CATIV (for 4006, 4005) 1000 V CATII / 600 V CATIII High Voltage Test * Short-term measured value deviation may occur during electro-magnetic interference thus reducing the specied operating quality Environmental Conditions Operating temperature Storage temperature...

Meas. Function Input Impedance Digital display Inherent deviation at reference condition Overload capacity BUZZER DIODE

Inuence Quantities Measured Quantity/ Measuring Range Frequency of the Measured quantity Battery Voltage Waveform of the Measured quantity 6 Digit 4 Digit 3 Digit 5 Digit Relative Humidity 1) With temperature: Error data apply per 10 K change in temperature. With frequency: Error data apply to a display from 300 digits onwards. 2) With unknown waveform (crest factor CF > 2), measure with manual range selection 3) With the exception of sinusoidal waveform. 4) After the “

Inuence Quantities Inuence Quantity Measured Quantity/ Measuring Range Inuence Noise quantity max. 1000 V dc Common Mode interference voltage Normal Mode interference voltage Noise quantity max. 1000 V ~ 50 Hz, 60 Hz sinusoidal Noise quantity V ~ Value of the measuring range at a time Max. 1000V~ ,50Hz, 60Hz Sinusoidal Response time (After manual range selection) Measured Quantity/ Measured range Response Time Attenuation Of Analog indication From 0 to 80 % of upper range limit. From 0 to 50 % of upper range limit. From 0 to 80 % of upper range limit.

Display LCD display eld 58 mm X 31.4 mm with digital display, analog scale and with display of measurement unit, and Various special functions. Digital Display Character height Main Display Character : 12mm Sub Display Character : 7mm Overrange display Polarity display “–” sign is displayed when positive pole at “ ” Sampling rate Analog Indication LCD scale Analog Bar graph Scale length 0 to 60 with 66 scale divisions Polarity Indication “-” sign on scale digits Over range indication Sampling rate Multimeter display : 1. Digital Main display with decimal point and polarity 2. Display for Automatic,...

Mechanical Design Instruments: IP 50 Connector sockets: IP 20 With Holster Without Holster Approx. 0.480 Kg with battery Ambient Conditions Standard Scope Of Supply Operating temperature range Storage temperature range 1 Copy Operating Instructions Relative humidity 1 Protective Case (Holster) Simpson Electric Company 520 Simpson Avenue Lac Du Flambeau, WI 54538-0099 (USA) Web: www.simpsonelectric.com Contact: +1 715-588-3311 www.simpsonelectric.com