Amik 100
6Pages

AMIK Three Phase Digital Panel Meters RELIABILITY BEYOND MEASURE Special Features 3 Line 4 Digits ultra bright LED Display (up to 9999) On site Programmable CT/PT Ratios User selectable CT Secondary 1A/5A User selectable 3ph 3wire / 3ph 4wire / single phase Network Storage of MIN / MAX values Measurement & Display of RPM, Run hours, ON hours & No. of Interrupts Limit switch with one relay UL and CSA listed Don’t require PT for the voltage measurement up to 500 ACV Amik 100 is a compact multifunction instrument which measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces multiple analog panel meters Parameter System Volts System Current Frequency Volts R–N Volts Y–N Volts B–N Volts R-Y Volts Y–B Volts B–R Current R Current Y Current B RPM Max (System Voltage / System Current) Min (System Voltage / System Current) Hour Run ON Hour Number of auxiliary interrupt

Ordering Information Product Code Display Type 1 Line (20mm display) System Type Input Voltage / Current Power Supply Limit switch Limit switch relay Accessories – Three-Phase Current Transformer A three-phase terminal style current transformer must be used with A M I K three phase meters. The current transformer is equipped with terminals to permit easy connection to the AMI K units. These terminals are #8-32 brass studs and come with a flatwasher, lockwasher and a regular nut (leads are not provided). Ordering Information Catalog Number Current Ratio

Application Amik 100 measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel meters. It measures electrical parameters like AC Voltage, AC Current, & many more. Product Features On site programmable PT/CT ratios It is possible to program primary of the external potential Transformer (PT), primary of external Current Transformer (CT) on site via front panel keys by entering into Programming mode. User selectable The secondary of external Current Transformer (CT) can be programmed on site to either 5A or 1A using front panel...

Dimension Details Reference conditions for Accuracy With optional Limit switch Input waveform Sinusoidal (distortion factor 0.005) Input frequency Auxiliary supply voltage Auxiliary supply frequency Accuracy Voltage Reference temperature Display Area ±1% of range (20... 100% of Nominal value) ±1% of range (10... 100% of Nominal value) Input Voltage Nominal input voltage (AC RMS) Phase –Neutral 290V L-N , Line-Line 500V L-L Max continuous input voltage Nominal input voltage burden < 0.3 VA approx. per phase (For external auxiliary meter) System PT secondary values System PT primary values...

Installation Overload Withstand Easy Clip in Installation on Panel 2 x rated value for 1 second, repeated 10 times at 10 second intervals 20x rated value for 1 second, repeated 5 times at 5 min intervals Operating Measuring Ranges Voltage Range With External Aux Voltage Range With Self Power Easy Clip-in mounting Current Range Swivel screw 0.025%/°C for Voltage 0.05%/°C for Current Panel Thickness : 1 - 3 mm for self clicking, 1 – 6 mm for swivel screws. Limit Switch (Relay) Switching Voltage & Current for Relay Enclosure Front Front with seal (Option) Back Environmental Operating...

Rear Connection Installation Dimensions and Weight Bezel size Panel cut-out Overall depth 55 mm (without output options) 62 mm (with output options). Multifunction Meter Panel Thickness MODEL : Amik 100 INPUT :500VL-L, 5A/1A, 45-65Hz AUX SUPPLY :40V-300V AC-DC , 3VA SR NO : 11/02/3232 1 - 3 mm for self clicking, 1 – 6 mm for swivel screws. 320 gm. Approx (with output options).. Electrical Connections Self Powered Aux 2 3 Phase 4 Wire Unbalanced Load 3 Phase 3 Wire Unbalanced Load *Note: For Measurement of parameters, Voltage must be present between terminal 2 & 11 for single phase or 3...