Dumpmaster Brochure
12Pages

Dumpmaster Bin-tipping Solutions from Simpro Handling Equipment Ltd Tip any bin, any size, any shape, at any height.

• Standard Dumpmasters have a galvanised frame and cradle, and are virtually maintenance-free. Dumpmasters are available either with full stainless steel construction, or with selected components from stainless-steel for critical hygiene areas or corrosive environments. • Standard drums and bins do not require clamping – simply place on the cradle and press the ‘Raise’ button. • Dumpmasters can be fitted with multi-purpose cradles which can empty all standard sizes from 80 to 240 litre bins or even 80 to 360 litre bins with no adjustment. • Dumpmasters are highly versatile and can be used...

‘Standard Series’ Dumpmasters Dumpmaster ‘standard series’ bin-tippers are an ideal solution for emptying bins and drums weighing up to 300kg at virtually any height. The tipping action of a Dumpmaster is one of the safest, most efficient, and easiest to use systems in the world. DM1500 DM1800 DM2600 Dumpmasters are available in four standard tipping height (700, 1200, 1500 and 1800mm) but can be custom-built with any tipping height up to six metres. Cradles are available for most common bins and drums. Page 3 © Copyright Simpro Handling Equipment 2011

‘Wide Series’ Dumpmasters 1500mm tipping height, 660l bin 1500mm tipping height, custom plastic bin on dolly ‘Wide Series’ Dumpmasters employ the same efficient tipping geometry as the well-proven ‘Standard Series’ machines. They are available with cradles to suit a range of larger bins, including 660l, 1000/1100l wheelie bins, or square and rectangular bins. Attachments are available to enable multiple bin sizes to be tipped, for example a cradle for tipping 1100l bins can be fitted with auxiliary catches to enable all standard wheelie bins from 80 litres up to 660 litres to be tipped as...

Options and Accessories for Dumpmaster Bin-tippers A range of accessories is available to provide additional features or functionality for Dumpmaster bin-tippers. Many of these features can be retro-fitted to existing machines. Guarding Options and Accessories: • Swing-up door: A swing-up door supported by gas truts may be fitted instead of the standard side-hinged door(s). The option is more compact and the door can be easily fitted with a solenoid lock for additional safety. • Front panel: A pressed steel panel is available for the front of standard series Dumpmasters. Note that this face...

• Operator Guard: A polycarbonate guard screen is available to protect the operator from glass or chemical splashes. • PET-G guarding: PET-G guarding panels are available in place of the standard welded wire mesh guards. PET-G is virtually unbreakable (used for manufacturing softdrink bottles), but is more difficult to keep looking clean than wire mesh. • 25mm mesh guarding: the standard mesh is 50 x 4mm, which allows fingers through but no more. Smaller mesh is available if required. • Left-hinged door: the door on standard machines is hinged on the right-hand side. Left-hinged doors are...

Electrical Options and Accessories: • Power Supply: Dumpmasters can be powered by 1-phase, 3-phase, battery, (or even compressed-air for use in hazardous areas). In all cases, the power supply is used to run a motor, which in turn drives a hydraulic pump. The lifting pressure and speed are accurately controlled, resulting in a safe, smooth operation. • Auto-cycle option: an auto-cycle controller is available for mains-powered machines only. This unit connects directly into a standard wiring loom, and has 3 potentiometers to adjust the raise, hold, and lower times. For more complex functions...

• Additional Controls: Additional controls can be fitted on the opposite side to standard. Several options are available: The simplest and cheapest method is to have the raise/lower buttons mounted in the vertical cover on the opposite side. The standard controls can also be retained if desired. An emergency stop or key switch can also be provided. Steel covers can be fitted to both sides. The power pack normally remains on the standard side. Controls can be fitted on either or both sides. Note: The power-pack covers can be fitted on the right-hand side rather than the left, although this...

Other Options and Accessories • Frame-mounted chutes: Two standard frame-mounted chutes are available for situations where the Dumpmaster cannot go right up against the skip, bin, or hopper. Note that the tipping height generally needs to be increased to allow for the slope of the chute. The chutes attach easily with two bolts, and can be folded up out of the way when not in use. Custom chutes are also available. 200 300 275 375 1570 1465 DM1800 with 200mm chute and 120l bin • Bin Hooks: The Bin-Hook kit attaches quickly and easily to most Dumpmasters, allowing them to be attached securely...

• Stainless-steel construction: Dumpmasters are available either completely constructed from stainless-steel, or with selected components made from stainless-steel. • Corrosion-resistant lifting chains: if the Dumpmaster is to be used in a corrosive environment, nickel-plated lifting chains can be supplied. These offer a similar level of corrosion-resistance to stainless-steel while retaining the strength of standard chains. • Scales: where product needs to be accurately weighed, platform scales can be provided to fit under the cradle. The weight of the cradle, bin, and product is recorded...

Electrical specifications: Motor Type Supply Voltage Power Current Draw Control Voltage 1-phase 200 – 240Vac 1.1kW 6.5 Amps 24Vac 3-phase 400 – 430Vac 0.75kW 1.9 Amps 24Vac Battery 12Vdc 0.80kW 125 Amps 12Vdc IP Rating: The Raise/Lower, key switch, and Emergency Stop switches are rated to IP66. Motors are rated to IP54 but are mounted inside a steel cover which provides additional protection. Castors: 4 x 100mm swivel castors, 2 with brake Hydraulic: • Pressure-compensating valve to regulate lowering speed • Pressure-relief valve to limit lifting capacity. Also available from Simpro:...