Simon Moos Maskinfabrik a|s MOOS HIGH-TIP

Substantial savings with the MOOS High-Tip reception/transfer container... The cost of transporting small amounts of dewatered sludge and general wet waste arising for example from the MOOS KSA and AVC systems, road sweepers and vacuum tankers to a disposal point can be significantly reduced by using the MOOS High-tip container. The MOOS High-Tip reception/transfer container is mounted on a roll-on-off hook lift system and is easily transported to a transfer point. The container sides fold down to allow the easy and safe transfer of waste. The MOOS High-Tip container can be fitted with screening...

..and just one of the MOOS solutions in handling wet waste! The current problem faced when trying to dispose of significant quantities of waste containing a high percentage of liquid can be overcome by using the MOOS High-Tip container. Liquid can be drawn off leaving the dry solids behind. This makes it easier and cheaper to dispose of. The Moos High-Tip container is also one component of the MOOS mobile Wet waste recycling plant and is used in conjunction with MOOS AVC & EOD/DOD sludge dewatering equipment to recycle water from road sweepers etc. producing three different fractions i.e : •...

Technical specifications Down Fully elevated Hydraulic : Integrally mounted hydraulic station or auxiliary quick release coupling points MOOS High-Tip is constructed either with an integrated hydraulic station or through an auxiliary hydraulic feed unit. The MOOS High-Tip container can be fitted with screening grids for the removal of rags, crude debris, etc. The MOOS High-Tip container sides can easily be folded down to allow transfer of waste from sweepers or other low units. The MOOS High-Tip container can be fitted with discharge ports for sludge dewatering with the MOOS AVC/EOD/DOD system...