Front Loaderi Scan the QR code using your smartphone WHEEL SAWS Nebulizer for reducing dust emission (optional) SIDE DISCHARGE OF MATERIAL The special design of outlets ensures the correct expulsion of the milled material, leaving the trench cleared at the set depth. Hydraulic depth adjustment (starting from T 450). Performer (Simex patented): allows the operator to optimize the equipment’s performance according to the forward speed of the operating machine. Hydraulic side shift Cutting disks for widths from 25 to 250 mm, and depths from 150 to 800 mm. SEGMENTED DISK (Only T450S and T600S models). Disk with removable, interchangeable segments allows quick variation of the trench width while maintaining the same base wheel.

T 200 in special configuration. Micro-trench for laying fibre optic cables. Designed for set-section trenches on hard and compact surfaces such as asphalt, cement and rock, the T and TA wheel saws for skid steer mounting offer cutting and trenching options for depths from 150 to 800 mm, and for widths from 25 to 250 mm. STANDARD TEETH FOR ASPHALT CEMENT AND ROCK AVAILABLE WHEELS: STANDARD WHEEL For wheel widths between 25 and 30 mm T 800. Full depth trench (800 mm) for later laying of water pipelines. For wheel widths between 40 and 50 mm SEGMENTED WHEEL For wheel widths 80 mm or greater CONVEYOR...

MINI- AND MICRO-TRENCHING Unlike with conventional trenching, mini- and microtrenching are much faster, with much lower production of waste material, considerably lower restoration times and costs. Within the T range, Simex offers models T 200, T 300 and TA 300 for mini- and micro-trenches specifically to install fibre optic cables in final connections to buildings. THE T800 MODEL: FOR HIGH HYDRAULIC POWER The T800 is fitted with a built-in motor that enters the trench, to reach depths of up to 800 mm. This is also the only model that works in reverse. T 300. Construction of micro-trench with...

DOWNLOAD THE UPDATED TECHNICAL BROCHURE Scan the QR code using your smartphone TECHNICAL DATA Trench width Trench depth Depth adjustments Side shift Trench clearing device Conveyor belt Lateral tilt Segmented wheel Aspiration device Operating weight with standard wheel (1) Upon request 1) The installer is responsible for ensuring that the equipment meets the prime mover’s specifications and weight requirement. 2) Only for models T450 S and T600 S. *) Fitted with segmented wheels. S imex does not accept responsibility or liability for the information provided. Technical modifications may vary...