Technical Specifications Summary for TF Series Models

Models Covered: TF200, TF400, TF850, TF1100, TF2100, TF2500, TF3100

Load Capacity (lbs):
- Ranges from 5,500 to 165,400 lbs across models.
- Specific ranges per model increase progressively from TF200 (5,500 - 15,500 lbs) to TF3100 (110,000 - 165,400 lbs).

Weight (lbs):
- Varies from 660 lbs (TF200) up to 6,470 lbs (TF3100).

Torque (lbf.ft):
- Ranges from 2,080 lbf.ft (TF200) to 35,400 lbf.ft (TF3100).

Force (lbf):
- From 3,400 lbf (TF200) to 28,700 lbf (TF3100).

Pressure (psi):
- Operating pressure is mostly 5,100 psi for smaller models (TF200 to TF850) and increases to 5,800 psi for larger models (TF1100 to TF3100).

Flow Rate (gpm):
- Flow rates range from 12-21 gpm (TF200) up to 92-132 gpm (TF3100), increasing with model size.

Dimensions (inch):
- Various inch values are listed (40, 45, 30, 66, 10), but the exact association with models or parameters is unclear.

Summary:
This data provides key performance and operational parameters for a series of TF models, showing a clear progression in load capacity, torque, force, pressure, and flow rate as model size increases. The pressure rating steps up for larger models, indicating design adaptations for higher performance. Weight and flow rate scale accordingly, reflecting the increased capacity and operational demands. The inch measurements likely relate to physical dimensions or component sizes but require clarification.

Critical Points:
- Ensure operating pressure does not exceed specified psi for each model.
- Match flow rate requirements to model capabilities.
- Consider weight and torque specifications for application suitability.
- Clarify dimension data for installation or compatibility purposes.