Weight indicators I weight meter to work with load cells in weighing and force measurement systems inputs: tensometer load cells 4-wire or 6-wire, 1 x digital outputs: 2 x digital (REL or OC), 1 x analogue (active or passive) data sheet or dead weight calibration high protection class IP 65 (front side) RS-485 / Modbus RTU signal peak value detection The SWI-94 weight meter is designed for operations with load cells (strain gages) in simple industrial applications not requiring legal metrology approval. The meter is equipped with operating pushbuttons which allow tare weight setting, zero setting for empty balance and displaying of gross and net weight values. The readouts of the measured mass are presented on a 6-digit LED display. The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold values. The meter's software allows performing two calibration methods: data sheet calibration or dead weight calibration. Moreover, the meter can be additionally equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The meter can be configured with the local keyboard or via the RS-485 communication port. TECHNICAL DATA Power supply Power consumption SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Weight indicators Panel cut-out dimensions EXAMPLARY PIN ASSIGNMENTS85-260V AC/DC^ 4,5W ACTIVE current output - + 3 4 C€ EXC+ SIGN+ SENSE- version with 2 x REL and 1 x AO 0/4-20 mA, active version with 2 x OC and 1 x AO 4-20 mA, passive ORDERING options: 01 : IP 65 frame (standard) 0P : IP 65 frame + operating temp. -20°C f +50°C power supply: 3 : 24V AC/DC 4 : 85V - 260V AC/DC SWI-94-1G3X-1-X-XX1 type of outputs:-^ ^— 3 : 2 x REL + 1 x AO (0/4-20 mA, active, non-isolated) 4 : 2 x OC + 1 x AO (0/4-20 mA, active, non-isolated) 9 : 2 x REL + 1 x AO (4-20 mA, passive, isolated) A : 2 x OC + 1...

Meters accessories SMP-99/94 to mount 96 x 48 mm size unit in place of 96 x 96 mm cut-out MOUNTING PLATES SMP-147/94 to mount 96 x 48 mm size unit in place of 144 x 72 mm cut-out BOARD THICKNESS BRACKETS / ADAPTORS SPH-07 1 ÷ 7 mm board thickness brackets (2 pcs) standard included with device SPH-45 1 ÷ 45 mm board thickness brackets (2 pcs) SPH-05 1 ÷ 5 mm board thickness brackets (2 pcs) SRH-94 brackets for mounting devices on DIN 35/7.5 or 15 rail (2 pcs) SimCorder Soft is a visualisation application created to facilitate work with advanced networks of the SIMEX devices, for acquisition, visualisation,...