Serial displays SW-BCD-94 universal indicator with serial and parallel input 4 strobe inputs; 16 data inputs RS-485 / Modbus RTU SLAVE choice of number of strobe inputs and strobe signal type choice of input and displayed data type display brightness adjustable in 8 steps free configuration software S-Config The SW-BCD-94 indicator can be used as the indicator output for PLCs to display data in the binary, bcd or byte format or to show typical information transmitted over the RS-485 interface. Depending on the parameter settings, the indicator can display: - digits (0 - 9), with programmable decimal point, - binary data (0 - 9, A - F), showing the statuses of e.g. the address lines, data lines, etc. - various messages and text which can be created on the 7-segment digital displays. The meter can be configured with the local keyboard or free S-Config software via the RS-485 communication port. SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Serial displays DIMENSIONS 5 Side view Case dimensions Panel cut-out dimensions Strobe /Address ORDERING SW-BCD-94-A700-1-X-XX1 options: 00 : no options 01 : IP 65 frame 08 : operating temp. -20°C ÷ +50°C 0P : IP 65 frame + operating temp. -20°C ÷ +50°C SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Meters accessories SMP-99/94 to mount 96 x 48 mm size unit in place of 96 x 96 mm cut-out MOUNTING PLATES SMP-147/94 to mount 96 x 48 mm size unit in place of 144 x 72 mm cut-out BOARD THICKNESS BRACKETS / ADAPTORS SPH-07 1 ÷ 7 mm board thickness brackets (2 pcs) standard included with device SPH-05 1 ÷ 5 mm board thickness brackets (2 pcs) SPH-45 1 ÷ 45 mm board thickness brackets (2 pcs) SRH-94 brackets for mounting devices on DIN 35/7.5 or 15 rail (2 pcs) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to change the configuration...