SPP-638
3Pages

Catalog excerpts

Flow meters flow meter, batcher, totalizer in wall mounted IP 67 housing 1 input 0/4-20 mA + 1 programmable function input binary outputs REL / OC analogue output: active or passive, power supply output: 24V DC RS-485 / Modbus RTU display of instantaneous and the total flow values batching and counting of doses ultra bright red, green and blue display free configuration software S-Config The SPP-638 flow counters encased in a tight, wall-mounted housing (IP 67) with 6-digit, large LED display are designed to work together with flow transducers equipped with analogue input. The purpose of flow counters is to measure the instantaneous flow value and to record the total flow of media like liquids, gases or loose materials. A wide range of total flow indication (up to 16 digits) allows controlling the flow value for a long operation time. Thanks to the built-in batcher function the SPP-638 counters can be used in many industries like: food, pharmaceutical or paint and varnish industry. The REL / OC control outputs can be programmed depending on the instantaneous flow value, batcher or total flow value. Additionally the counter may be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The counter may be configured with no need to open the case, by using the remote controller, the local keyboard or with free S-Config software via the RS-485 communication port. TECHNICAL DATA 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated for 19V ÷ 50V DC: max. 8,7 W; for 16V ÷ 35V AC max. 13 VA; for 85 ÷ 260V AC/DC max. 29 VA LED, 6 x 38 mm high, red, green or blue (according to order), ultra bright Measurement range instantaneous flow values: 0 ÷ 9999 + decimal point current: 0 ÷ 20 mA or 4 ÷ 20 mA, overload-protected, sinking current limited to ca. 40 mA, input resist.: < 65 Ω (typ. 50 Ω) programmable: binary 24V DC, not separated Input levels low level: 0 V ÷ 1 V; high level: 10 V ÷ 30 V (about 12 mA @ 24V) Counter capacity total flow: over 4 x 109 pulses (max. 16 significant digits); batcher: up to 65536 m3 Readout precision instantaneous flow values: selected in the 0 ÷ 0.00000 of unit; total flow and batcher: selected in the 0 ÷ 0.000 of unit instantaneous flow values: l or m3 per second, minute or hour; total flow and batcher: l or m3 Outputs (option) Analogue output (available with 2 x REL or OC, see ordering) active current: operating range 0/4-20 mA (max. 0-24 mA), load resistance 700 Ω max., resolution 13 bit passive current: isolated, operating range 4-20 mA (max. 2,8-24 mA), load resistance 600 Ω@24VDC, resolution 13 bit active voltage: operating range 0/1-5V, 0/2-10V (max. 0-11V), load resistance min. 2000 Ω, resolution 13 bit Power supply output Communication interface RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU (not galvanically isolated) Operating temperature Storage temperature -10°C ÷ +70°C (standard), -20°C ÷ +70°C (depending on option) Protection class wall mounting; material: ABS + fibreglass Dimensions (WxHxD) SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Open the catalog to page 1

Flow meters LED DISPLAY VERSIONS Ultra bright display (according to order): - red, - green, - blue. DIMENSIONS Side view Distances between mounting holes Case dimensions DATA+ DATAGND programmable input version with 2 x OC 85-260V AC/DC 50/60Hz 11VA - + ACTIVE current output programmable input DATA+ DATAGND version with 2 x REL, 1 x OC and 1 x AO 0/4-20 mA, active SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Open the catalog to page 2

Flow meters ORDERING SPP-638-X-10-XXXX0-10-X-XX1 display: R : red, ultra bright G : green, ultra bright B : blue, ultra bright options: 00 : no options 08 : operating temp. -20°C ÷ +50°C power supply: type of outputs: 3 : 24V AC/DC 1100 : 2 x REL 4 : 85V - 260V AC/DC 1200 : 1 x REL + 1 x OC 2200 : 2 x OC 1111 : 4 x REL 2222 : 4 x OC 1125 : 2 x REL + 1 x OC + 1 x AO (4-20 mA, passive, isolated) 112D : 2 x REL + 1 x OC + 1 x AO (0/4-20 mA, active, non-isolated) 112E : 2 x REL + 1 x OC + 1 x AO (0/1-5V, 0/2-10V, active, non-isolated) REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be...

Open the catalog to page 3