Catalogs >
SIMEX Sp. z o.o. >
SLIK-N118_eng.pdf

SLIK-N118_eng.pdf
3Pages

Catalog excerpts

Electronic counters SLIK-N118 multi-purpose counter in wall mounted IP 67 case batching function 2 pulse counting inputs + 1 programmable function input 1 counter reset input 0 or 2 REL / OC outputs digital debouncing filter 4 counter reset sources (manual, ext, auto, modbus) free configuration software S-Config The SLIK-N118 universal, programmable counters are encased in a tight, wall-mounted housing (IP 67) and equipped with two independent counting inputs that can operate in various configurations (pulse or quadrature). Additional programmable input can change basic function of counting inputs (addition or subtraction of pulses from inputs, change the direction of counting) or hold counting without clearing. The SLIK-N118 counter features an independent reset input. The REL / OC outputs with programmable thresholds can be used to control external equipment. The counter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port. TECHNICAL DATA Power supply Power consumption 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 5 VA; for 19V ÷ 50V DC power supply: max. 5 W LED, 6 x 13 mm high, red, brightness adjustable in 8 steps Displayed values range pulse, fully isolated: - counting (down-up and up-down or quadrature) - programmable function - counter reset - common (COM) Input levels low level: 0 V ÷ 1 V; high level: 10 V ÷ 30 V Input frequency electronic sensor: 10 kHz (standard), 5 kHz (quadrature); contact sensor: max. 90 Hz (adjustable filter) Outputs (option) Power supply output Communication interface RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU (not galvanically isolated) non-volatile memory, EEPROM type Operating temperature Storage temperature -10°C ÷ +70°C (standard), -20°C ÷ +70°C (depending on option) Protection class wall mounting; material: ABS + polycarbonate (standard); 100% polycarbonate (on request) Dimensions (WxHxD) without glands: 110 x 80 x 67 mm; with glands: 110 x 105 x 67 mm Data memory SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www

Open the catalog to page 1

Electronic counters DIMENSIONS Case dimensions Side view Distances between mounting holes A, B: counting inputs C: programmable input D: counter reset input com: common A, B: counting inputs C: programmable input D: counter reset input com: common ORDERING SLIK-N118-15XX-1-X-XX1 options: 00 : no options 08 : operating temp. -20°C ÷ +50°C type of outputs: 0 : no output 1 : REL 2 : OC SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Open the catalog to page 2

Counters accessories REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC - 4 alkaline batteries type LR44 from 0,5 to 5 m (depend on programmed device features) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows...

Open the catalog to page 3