Electronic counters multi-purpose counter in wall mounted IP 67 housing batching function 2 pulse counting inputs + 1 programmable function input 1 counter reset input binary outputs REL / OC digital debouncing filter 4 counter reset sources (manual, ext, auto, modbus) ultra bright red, green and blue display free configuration software S-Config The SLIK-638 universal, programmable counters encased in a tight, wall-mounted housing (IP 67) with 6-digit, large LED display are equipped with two independent counting inputs that can operate in various configurations (pulse or quadrature). Additional programmable input can change basic function of counting inputs (addition or subtraction of pulses from inputs, change the direction of counting) or hold counting without clearing. The SLIK-638 counter features an independent reset input. The REL / OC outputs with programmable thresholds can be used to control external equipment. The counter may be configured with no need to open the case, by using the remote controller, the local keyboard or with free S-Config software via the RS-485 communication port. TECHNICAL DATA Power supply Power consumption 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated for 19V ÷ 50V DC: max. 8,7 W; for 16V ÷ 35V AC max. 13 VA; for 85 ÷ 260V AC/DC max. 29 VA LED, 6 x 38 mm high, red, green or blue (according to order), ultra bright Displayed values range pulse, fully isolated: - counting (down-up and up-down or quadrature) - programmable function - counter reset - common (COM) Input levels low level: 0 V ÷ 1 V; high level: 10 V ÷ 30 V Input frequency electronic sensor: 10 kHz (standard), 5 kHz (quadrature); contact sensor: max. 90 Hz (adjustable filter) Outputs (option) Power supply output Communication interface RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU (not galvanically isolated) non-volatile memory, EEPROM type Operating temperature Storage temperature -10°C ÷ +70°C (standard), -20°C ÷ +70°C (depending on option) Protection class wall mounting; material: ABS + fibreglass Dimensions (WxHxD) Data memory SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www

Electronic counters LED DISPLAY VERSIONS Ultra bright display (according to order): - red, - green, - blue. DIMENSIONS Side view Distances between mounting holes Case dimensions A, B: counting inputs C: programmable input D: counter reset input com: common DATA+ DATAGND A, B: counting inputs C: programmable input D: counter reset input com: common SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Electronic counters ORDERING SLIK-638-X-50-XXXX0-10-X-XX1 display: R : red, ultra bright G : green, ultra bright B : blue, ultra bright options: 00 : no options 08 : operating temp. -20°C ÷ +50°C REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC - 4 alkaline batteries type LR44...