SLC-94
3Pages

Catalog excerpts

Timers, hour meters SLC-94 timer and totalizer START/STOP pulse inputs 2 reset sources: manual or electronic 0 or 2 REL / OC outputs RS-485 / Modbus RTU wide range of precision and presentation formats ACCESS option - easy threshold modification free configuration software S-Config SLC-94 is designed for precision time (period) measurements, e.g. duration of time interval and mesurements of machine's operating time. Signals from push-buttons or contactors of control devices are connected to the terminals placed on back side of the counter. Properly programmed counter allows to measure time period between {START} and {STOP} signals. Other configuration allows to measure the activity time of {START} signal. In addition the measure can be started, stopped and cleared using local keyboard (on front of the device) or via RS-485 interface. Apart from basic function of time counting, totalizer is also available. Both counters are triggered and stopped simultaneously. Time counting is realised in range 0 ms to 999 99.9 hours. Build in two relay outputs allow use of this counter for control in many time depend processes. The counter can be configured with the local keyboard or free S-Config software via the RS-485 communication port. TECHNICAL DATA 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; for 19V ÷ 50V DC power supply: max. 4,5 W LED, 6 x 13 mm high, red, brightness adjustable in 8 steps Displayed values range depending on display format main timer: max. from 0 ms to 999 99.9 hours totalizer: max. from 0 sec. to 999 99.9 hours pulse, galvanically isolated: - start counting (START) - stop counting (STOP) - counter reset (RESET) - common (COM) Input levels low level: 0 V ÷ 1 V; high level: 10 V ÷ 30 V (12 mA @ 24V) Inputs sampling frequency Time between input signals edges Binary outputs Power supply output Communication interface RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU (not galvanically isolated) Data memory non-volatile memory, EEPROM type Operating temperature Storage temperature Protection class IP 65 (front), available additional frame IP 65 for panel cut-out sealing; IP 20 (case and connection clips) panel mounting; material: NORYL - GFN2S E1 case (WxHxD): 96 x 48 x 100 mm panel cut-out dimensions: 90,5 x 43 mm installation depth: min. 102 mm board thickness: standard 7 mm or other depending on used board thickness brackets (see Accessories) SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl Power supply Power consum

Open the catalog to page 1

Timers, hour meters DIMENSIONS 5 Side view Case dimensions Panel cut-out dimensions COM RESET STOP START COM RESET STOP START ORDERING SLC-94-24XX-1-X-XX1 options: 00 : no options 01 : IP 65 frame type of outputs: 0 : no output 1 : REL 2 : OC SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Open the catalog to page 2

Counters accessories SMP-99/94 to mount 96 x 48 mm size unit in place of 96 x 96 mm cut-out MOUNTING PLATES SMP-147/94 to mount 96 x 48 mm size unit in place of 144 x 72 mm cut-out BOARD THICKNESS BRACKETS / ADAPTORS SPH-07 1 ÷ 7 mm board thickness brackets (2 pcs) standard included with device SPH-05 1 ÷ 5 mm board thickness brackets (2 pcs) SPH-45 1 ÷ 45 mm board thickness brackets (2 pcs) SRH-94 brackets for mounting devices on DIN 35/7.5 or 15 rail (2 pcs) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to change the...

Open the catalog to page 3