Electronic counters SLB-94 universal counter with internal cycles counter and totalizer 1 pulse counting input 3 independent reset sources 4 REL / OC outputs prescaler and digital filter RS-485 / Modbus RTU ACCESS option - easy threshold modification free configuration software S-Config Universal totalizing SLB-94 counter is designed for counting the pulses related to physical quantities like: number of revolutions, details, swichings etc. Allows counting in three internal registers called: main counter, cycles counter, and totalizer. Is equipped with 4 relay (or OC) outputs with independently defined switch-on altuation setpoints, which can be used for controlling of external devices. SLB-94 is equipped with 3 inputs which allows external reset of selected counter. All inputs of the counter are separated. The counter can be configured with the local keyboard or free S-Config software via the RS-485 communication port. TECHNICAL DATA Power supply Power consumption 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; for 19V ÷ 50V DC power supply: max. 4,5 W LED, 6 x 13 mm high, red, brightness adjustable in 8 steps Displayed values range current values counter: -99 999 ÷ 999 999 + decimal point cycles counter: 0 ÷ 999 999 + decimal point totalizer counter: -99 999 999 999 ÷ 999 999 999 999 pulse, galvanically isolated: - counting - reset of current values counter - reset of cycles counter - reset of totalizer counter - common Input levels low level: 0 V ÷ 1 V; high level: 10 V ÷ 30 V (12 mA @ 24V) Input frequency electronic sensor: 10 kHz contact sensor: max. 90 Hz (adjustable filter) Binary outputs Power supply output Communication interface RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU (not galvanically isolated) non-volatile memory, EEPROM type Operating temperature Storage temperature -10°C ÷ +70°C (standard), -20°C ÷ +70°C (depending on option) Protection class IP 65 (front), available additional frame IP 65 for panel cut-out sealing; IP 20 (case and connection clips) panel mounting; material: NORYL - GFN2S E1 case (WxHxD): 96 x 48 x 100 mm panel cut-out dimensions: 90,5 x 43 mm installation depth: min. 102 mm board thickness: standard 7 mm or other depending on used board thickness brackets (see Accessories) SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Electronic counters DIMENSIONS 5 Side view Case dimensions Panel cut-out dimensions D - reset of totalizer counter C - reset of cycles counter B - reset of current values counter A - counting input D - reset of totalizer counter C - reset of cycles counter B - reset of current values counter A - counting input ORDERING SLB-94-144X-1-X-XX1 options: 00 : no options 01 : IP 65 frame 08 : operating temp. -20°C ÷ +50°C 0P : IP 65 frame + operating temp. -20°C ÷ +50°C power supply: 3 : 24V AC/DC 4 : 85V - 260V AC/DC SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70,...

Counters accessories SMP-99/94 to mount 96 x 48 mm size unit in place of 96 x 96 mm cut-out MOUNTING PLATES SMP-147/94 to mount 96 x 48 mm size unit in place of 144 x 72 mm cut-out BOARD THICKNESS BRACKETS / ADAPTORS SPH-07 1 ÷ 7 mm board thickness brackets (2 pcs) standard included with device SPH-05 1 ÷ 5 mm board thickness brackets (2 pcs) SPH-45 1 ÷ 45 mm board thickness brackets (2 pcs) SRH-94 brackets for mounting devices on DIN 35/7.5 or 15 rail (2 pcs) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to change the configuration...