Portable Data LOGGING SYSTEMS

Introduction SIMEX is a Polish manufacturer and supplier of industrial automation equipment. The company has been in the market for nearly 30 years and offers services provided by a team of young and qualified professionals, both designers and programmers, as well as sales representatives. We specialise in the production of devices from the following categories: counters, indicators, controllers while concentrating on data recorders. In the offer you will find two families of high quality products for data recording: MultiCon and a series for the less advanced processes - MultiLog. Both devices...

Portable case - the advantages Protection of electronic equipment and valuable recorded data is a growing concern. This is particularly important in non-stationary solutions, when measuring instruments are mounted in portable, sealed transport cases, which are the only barrier against the harsh environmental conditions. Therefore, this case must meet a number of requirements guaranteeing the safety of the devices installed in it, and hence the reliability of this type of data recorders. In the sets offered by our company we use PELI™ cases, which is a proven and reliable solution in the transport...

up to 23 input/output/communication connectors colour display with touchscreen, TFT 3.5” or 5.7” RS-485 or Ethernet communication tight IP 67 case MultiCon CMC in a P130 portable case is a combination of a multichannel controller/data recorder with a sealed waterproof and dustproof housing. This combination gives you the ability to safely perform measurements and record data in particularly demanding and difficult applications, for example, in field conditions with high dust, high humidity or high risk of flooding the device. The main advantages: - USB Host port for retrieving data, - waterproof...

TECHNICAL DATA CMC-99 in portable case Power supply Inputs / outputs type up to 23 input/output connectors: universal, analogue (0/4 ÷ 20 mA, 0/1 ÷ 5V, 0/2 ÷ 10V), termocouple (J, K, S, T, N, R, B, E, L, ± 25 mV, ± 100 mV, -10 ÷ 25 mV, -10 ÷ 100 mV), resistance (Pt100, Pt500, Pt1000, Pt'50, Pt'100, Pt'500, Ni100, Ni500, Ni1000, Cu50, Cu100, Cu'50, Cu'100, 0 ÷ 300 Ω, 0 ÷ 3 kΩ), counter/ flowmeter/ ratemeter, digital up to 23 input/output connectors: universal, analogue (0/4 ÷ 20 mA, 0/1 ÷ 5V, 0/2 ÷ 10V), termocouple (J, K, S, T, N, R, B, E, L, ± 25 mV, ± 100 mV, -10 ÷ 25 mV, -10 ÷ 100 mV), resistance...

up to 11 input/output/communication connectors LCD 2.9” monochrome display USB Host port for flash data storage 2 electronic relay outputs optional The portable MultiLog SRD-99 data recorder set in a P130 portable case is designed to record, display current or average values ​and present data in the form of trend graphs of various technological parameters. The set may be equipped with 1 to 8 measuring inputs: 0/4-20 mA or Pt 100/500/1000 and, optionally, 2 relay outputs. The primary function of the outputs is signalling alarm states but the configuration menu also allows to use them in a variety...

The Loggy Soft enables the visualization, archiving and printing of measurements (e.g. temperature, humidity, pressure) stored in MultiLog device memory. The S-Toolkit enables configuration reading and writing operations, updating the device firmware and obtaining basic information on MultiLog series devices through RS-485 serial interface or flash-disk devices plugged into USB port. TECHNICAL DATA EXAMPLARY PIN ASSIGNMENT SRD-99 in portable case Power supply Measuring inputs Digital input up to 8 measuring inputs 1 digital input, 10-30V DC Measuring range Outputs Sensor supply output Power supply...

e-mail: [email protected]