H environmental MONITORING & CONTROL

■ TRANSMITTER DISPLAY METER CONTROLLER ProSens is a new line of modern industrial devices, which integrates transmitters, displays, meters and controllers functionalities. Using the latest miniaturisation technologies these compact devices are able to be equipped with two independent universal inputs, two binary or two analogue outputs, as well as communication port RS-485 with Modbus protocol. Within the ProSens range, models 200 and 400 have integrated temperature and relative humidity sensor. As well as an exceptionally wide working temperature range (-30 f +120°C) they are also equipped with...

Measurement The primary functionality of ProSens is taking measurements. Depending on needs and requirements, this compact device is equipped with top quality, precise and stable temperature, humidity or air flow sensors, and/or with universal inputs that are standard for industrial automation. Thanks to its equipment the device guarantees a very high level of measurement reliability. Both version of probes integrated and cable ones - are made of stainless steel. The sensors are protected with a replaceable PTFE or stainless steel mesh filter. The filter type is adjusted to a particular version...

Main features 1 or 2 binary / analogue outputs Acoustic and visual alarm indication Outputs state indication Personalised graphic units Infrared receiver Local keypad or PC software for set-up Stainless steel 316L probes 1 or 2 universal inputs Temperature and humidity measurements up to 120°C and 100% RH (QM series) Air flow up to 30 m/s (QF-622) 1 or 2 measuring channels available, with or without a probe Integrated, separable or cable probes made of 316L steel, used for temperature or temperature and humidity measurements Replaceable filter made of PTFE or 316L mesh, 25 µm Universal inputs...

A wide range of possibilities Thanks to the universal device construction it is possible to apply 1 or 2 independent measuring channels. The most common type equipped with a probe (integrated or cable one) measures temperature, temperature and humidity or air flow in the sensor area. Regardless of the above, in case of a two-channel device a user can connect an external sensor by means of another, universal measuring input. If there is no need to apply constructions equipped with probes, both measuring inputs in the device can be used to connect external sensors installed directly on external...

Data presentation No display version, LED signalling One measurement display mode Two measurements display mode Four measurements display mode Menu display mode Device status information

QF-622 air flow measurement The ProSens line model QF-622 is dedicated to HVAC systems, but not only. The thermal air velocity transmitter used in this model, allows measuring flow of air and other compatible, not combustible gasses. Thanks to the wide range of measuring probes, ProSens transmitter can be used in: air-condition systems, flow measurements, fans monitoring, cooling systems, or many similar applications. No display version, LED signalling One measurement display mode Two measurements display mode

Visualisation & utility software SimCorder Soft SimCorder Soft communicates with external devices using the RS-485 interface with the Modbus RTU protocol and reads measurement data from the above devices. A computer may be connected directly to the network of devices or via the internet. In case of the latter, an RS-485 Ethernet converter is necessary. This software enables sound and visual alerts (e.g. in case the temperature is too high in the cooler, excessive humidity, insufficient flow etc.). The system can be configured so that each alert evokes a particular response of selected signalling...

Accessories Probes Ordering: PPQ-612-00-X-X measurement of: 2 : temperature 3 : temperature & humidity PPQ-612-00-X-X Cable probe Ø18, L=90 mm, w/o cable, housing SS 316L, filter FPQ-P350 connector type: 2 : connector, operating temp. -30 ÷ +80°C PPQ-612-XX-X-X Cable probe Ø18, L=90 mm, housing SS 316L, filter FPQ-P350 measurement of: 2 : temperature 3 : temperature & humidity Cable probe Ø12, L=200 mm, housing SS 316L, filter from SS mesh 25 µm connector & cable type: 1 : gland, PUR covered, operating temp. -30 ÷ +80°C 3 : gland, TPE covered, operating temp. -30 ÷ +120°C PPQ-622-XX-X-X Cable...

SIR-15 InfraRed remote controller may be used as external programming keyboard for all SIMEX devices equipped with IR receiver and remote programming functions. Pressing of any local IR controller keypads, causes transmission of it's code to the device. Function of particular keys depends on device features. Power supply voltage: 6V DC - 4 alkaline batteries type LR44 Operation range: from 0,5 to 5 m (depends on programmed device features) SRS-U4 Converter is designed to connect a USB host to slave devices equipped with RS-485 interface. The PC with special software can be used as a host. The...

probe version: 100-00-0 : without probe 211-00-0 : radial, Ø 18 mm, L=40 mm 212-00-0 : radial, Ø 18 mm, L=90 mm 213-00-0 : radial, Ø 18 mm, L=145 mm 421-00-0 : axial, Ø 12 mm, L=200 mm 422-00-0 : axial, Ø 12 mm, L=300 mm 612-00-2 : radial connector, no cable, Ø 18 mm, L=90 mm 612-XX-X : cable, Ø 18 mm, L=90 mm 621-XX-X : cable, Ø 12 mm, L=200 mm 622-XX-X : cable, Ø 12 mm, L=300 mm connector & cable type: 1 : gland, PUR covered, operating temp. -30 ÷ +80°C 2 : connector for Ø 18 mm probe, TPU covered, operating temp. -30 ÷ +80°C 3 : gland, TPE covered, operating temp. -30 ÷ +120°C 4 : connector...

Measure, Control and Log Data SIMEX Company exists on the market of industrial automation since 1986 as a manufacturer and distributor of test and measurement instruments. The scope of our manufacture includes equipment used to measure, control and record the temperature, humidity, pressure, level and flow. The test and measurement instruments offered are applicable in many industrial branches such as energy industry, heat engineering, mining, chemical, food and machine branch, and waste water handling. Our commercial offer can be operationally adapted to the expectations of our Customers, by...