Process meters SWE-73-A E low-cost meter in a small case input type defined from menu: 0/4-20 mA; 0/1-5V, 0/2-10V RS-485 / Modbus RTU brightness adjustable in 8 steps signal peak value detection all parameters are freely programmable with remote controller or free configuration software S-Config The low-cost SWE-73-A is a small, simple digital panel indicator, equipped with two measurement inputs: one current input (0-20/4-20mA) and one voltage input (0-5/1-5/0-10/2-10V). Current input has additionally overcurrent protection circuit, which protects standard resistor. The selection of active input is realised by software and selected input can be changed at any time. Additionally the SWE-73-A allows user to select a conversion characteristic of several kinds: linear, square, square root, and user defined (max. 20 points length). The 16-bit A/D converters used in them ensure very high stability and measurement precision. The RS-485 interface makes it easy to set up measurement networks in production process monitoring systems, and also to use the indicators as smart, programmable, digital converters of input signals for computer systems. The meter can be configured with IR remote controller or free S-Config software via the RS-485 communication port. Configuration of the device can also be programmed to the customer's order. SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Process meters QsimEX DIMENSIONS Panel cut-out dimensions DATA+ DATA-GND units: 0 : no unit on display °C % 01 : IP 65 frame 08 : operating temp. -20°C f +50°C 0P : IP 65 frame + operating temp. -20°C f +50°C * When configuration of the device should be set by SIMEX it's necessary to determine: - type of input (0-20 mA, 4-20 mA, 0-5 V, 1-5 V, 0-10 V, 2-10 V), - the beginning of measuring range according to 0/4 mA or 0/1/2 V (depending on version) - the end of measuring range according to 20 mA or 5/10V (depending on version). SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77,...

Meters accessories MOUNTING PLATES SMP-147/73 to mount 72 x 36 mm size unit in place of 144 x 72 mm cut-out REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC - 4 alkaline batteries type LR44 from 0,5 to 5 m (depend on programmed device features) SOFTWARE S-Config 2 is used for...