Serial displays SWS-W510 large-size indicator 100 mm LED display RS-485 / Modbus RTU MASTER / SLAVE selected from the menu possibility of displaying mnemonic messages display brightness adjustable in 8 steps all parameters are freely programmable with remote controller or free configuration software S-Config The SWS-W510 is a simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS 485 serial interface link. The displayed value may be collected from other device (in MASTER mode). The display brightness can be adjusted in 8 steps. The device has 4 buttons being used for main presets programming. To get high protection level, the keyboard is mounted under transparent cover. To allow user to change presets without opening the cover, an IR sensor is mounted. Remote controller keyboard is equivalent to the device keyboard. Modbus RTU protocol is used to communication with device. It is possible to order device with other communication protocol using RS-485 interface (special order required).The indicator can be configured with IR remote controller, local keyboard or free S-Config software via the RS-485 communication port. TECHNICAL DATA SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Serial displays QsimEX DIMENSIONS EXAMPLARY PIN ASSIGNMENTS 85-260V AC/DC 50/60Hz 11VA 00 : no options 08 : operating temp. -20°C f +50°C SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Meters accessories REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC - 4 alkaline batteries type LR44 from 0,5 to 5 m (depend on programmed device features) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to...