SP-4, SP-6 junction box enables the parallel connection of up to 6 load cells in a 4-wire or 6-wire circuit IP 65 protection class Connections (for SP-6) Output 1 EXC+ Junction box allows for quick and easy connection from 2 up to 6 load cells in multisensor systems, such as tank scales. The large enclosure of the junction box lets you put excess cable of the load cells inside the box (the cable length shortening is not recommended). Case dimensions Factory default the junction box has jumpers to connection of 4-wire load cells soldered . If you connect 6-wire load cells, these jumpers must be cut. EXC+ SENCE+ EXCSENCESIGN+ SIGNSHIELD Technical data Ordering SP-X load cells connected to the junction box: 4: up to 4 6: up to 6 Number of load cells: max. 6 load cells in a 4-wire or 6-wire circuit Operating temperature: -10°C ÷ +60°C Storage temperature: -25°C ÷ +85°C Protection class: IP 65 Case: wall mounting Case material: ABS Upper plate screws material: Polyamide Case dimensions: 230 x 140 x 95 mm Mounting holes spacing: 212 x 122 mm 80-556 Gdańsk, Wielopole 7, POLAND, tel. (+48 58) 762-07-77, fax 762-07-70, www.simex.pl, e-mail: info@sime