Flow meters SPI-N118 B flow meter, batcher, totalizer in wall mounted IP 67 case B 1 pulse counting input + 3 control inputs B 0 or 2 REL / OC outputs B analogue output: active or passive, power supply output: 24V DC B RS-485 / Modbus RTU B display of instantaneous and the total flow values B batching and counting of doses B free configuration software S-Config The SPI-N118 flow counters are encased in a tight, wall-mounted housing (IP 67) and designed to work together with flow transducers equipped with contact or electronic inputs. The purpose of flow counters is to measure the instantaneous flow value and to record the total flow of media like liquids, gases or loose materials. A wide range of total flow indication (up to 16 digits) allows controlling the flow value for a long operation time. Thanks to the built-in batcher function the SPI-N118 counters can be used in many industries like: food, pharmaceutical or paint and varnish industry. The REL / OC control outputs can be programmed depending on the instantaneous flow value, batcher or total flow value. Additionally the counter may be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The counter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port. M TECHNICAL DATA Power supply Power consumption SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Flow meters DIMENSIONS Case dimensions Side view Distances between mounting holes A: counting inhibition B: pulse input C: balance counter clearing D: batching counter clearing com: common input ACTIVE current output version with 1 x REL and 1 x AO 0/4-20 mA, active PASSIVE 85-260V isolated AC/DC current 5VA output ACTIVE voltage output version with 1 x REL and 1 x AO 0/1-5V, 0/2-10V, active A: counting inhibition B: pulse input C: balance counter clearing D: batching counter clearing com: common input A: counting inhibition B: pulse input C: balance counter clearing D: batching counter clearing...

Counters accessories REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC - 4 alkaline batteries type LR44 from 0,5 to 5 m (depend on programmed device features) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user...