Catalogs >
SIMEX Sp. z o.o. >
Digital IP67 indicator SWS-N118 datasheet

Digital IP67 indicator SWS-N118 datasheet
3Pages

Catalog excerpts

Digital IP67 indicator SWS-N118 datasheet - 1

Serial displays SWS-N118 indicator in wall-mounted IP 67 case display: 4 or 6 digits LED serial input power supply output: 24V DC RS-485 / Modbus RTU MASTER / SLAVE display brightness adjustable in 8 steps free configuration software S-Config The SWS-N118 is a simple digital panel serial indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS-485 serial interface link. The displayed value may be collected from other device (in MASTER mode). The display brightness can be adjusted in 8 steps. Thanks to the tight housing with high (IP 67) protection degree, this device is particularly suitable for operations in harsh environments. The 24V DC / 100 mA output is designed to supply measuring transducers, and the RS-485 port enables data transmission in production process monitoring systems. The meter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port. SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Open the catalog to page 1

Digital IP67 indicator SWS-N118 datasheet - 2

Data displays DIMENSIONS Case dimensions Side view Distances between mounting holes ORDERING SWS-N118-0000-1-X-XX1 options: 00 : no options 05 : 6 LED digits 08 : operating temp. -20°C ÷ +50°C 0W : 6 LED digits + operating temp. -20°C ÷ +50°C SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Open the catalog to page 2

Digital IP67 indicator SWS-N118 datasheet - 3

Meters accessories REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC - 4 alkaline batteries type LR44 from 0,5 to 5 m (depend on programmed device features) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user...

Open the catalog to page 3