Serial displays I indicator in tight wall-mounted case IP 67 multicolour or ultra bright red, green and blue, 57 mm LED display power supply output: 24V DC RS-485 / Modbus RTU MASTER / SLAVE adjustment of colours and brightness for the display password protected free configuration software S-Config The SWS-457 is a simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS-485 serial interface link. The displayed value may be collected from other device (in MASTER mode). As a main advantage, this device is equipped with a large, 57 mm high display offering ultra bright red, green and blue as well as multicolour LED's. User can change display colour in 9 steps range (through light green, yellow and through green) and display brightness in 8 steps range. Thanks to the tight housing with high (IP 67) protection degree, this device is particularly suitable for operations in harsh environments. The 24V DC / 100 mA output is designed to supply measuring transducers, and the RS-485 port enables data transmission in production process monitoring systems. The meter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port. M TECHNICAL DATA SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

Serial displays LED DISPLAY VERSIONS 1. Ultra bright display 2. Multicolour display Device is also equipped with a display offering multicolour LED's. It allows any colour settings in the range of red to green with additional levels of 7 colours in between. An interesting feature is also change the display colour depending on the state of control outputs, such as alarm state will change from green to red, or otherwise declared by the user. DIMENSIONS Side view Distances between mounting holes Case dimensions ORDERING SWS-457-X-00-00000-10-X-XX1 options: 00 : no options 08 : operating temp. -20°C...

Meters accessories REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC - 4 alkaline batteries type LR44 from 0,5 to 5 m (depend on programmed device features) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to...