1. Catalogs
  2. SIMEX Sp. z o.o.
  3. Digital indicator SWS-147

Digital indicator SWS-147
1 /3Pages

Digital indicator SWS-147

Digital indicator SWS-147
1 /3Pages

Catalog excerpts

Digital indicator SWS-147-1

Serial displays SWS-147 indicator with a large 4 x 38 mm display RS-485 / Modbus RTU MASTER / SLAVE transmission speed adjustable: 1200 -f 115200 bit/sek. display brightness adjustable in 8 steps password protected free configuration software S-Config The SWS-147 is a simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS-485 serial interface link. The displayed value may be collected from other device (in MASTER mode). As a main advantage, this device is equipped with a large, 38 mm high LED display. The display brightness can be adjusted in 8 steps. Modbus RTU protocol is used to communication with device. Baud rate is user defined in 1200 f 115200 baud range. The meter can be configured with the local keyboard or free S-Config software via the RS-485 communication port. SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

 Open the catalog to page 1
Digital indicator SWS-147-2

Serial displays QsimEX DIMENSIONS Panel cut-out dimensions power supply:- options: 00 : no options 01 : IP 65 frame 03 : green colour LED display 04 : IP 65 frame + green colour LED display 08 : operating temp. -20°C f +50°C 0P : IP 65 frame + operating temp. -20°C f +50°C 0L : green colour LED display + operating temp. -20°C f +50°C 0T : IP 65 frame + green colour LED display + operating temp. -20°C f +50°C SIMEX Ltd., Wielopole 11, 80-556 Gdansk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl

 Open the catalog to page 2
Digital indicator SWS-147-3

Meters accessories BOARD THICKNESS BRACKETS / ADAPTORS SPH-07 1 ÷ 7 mm board thickness brackets (2 pcs) standard included with device SPH-05 1 ÷ 5 mm board thickness brackets (2 pcs) SPH-45 1 ÷ 45 mm board thickness brackets (2 pcs) SRH-94 brackets for mounting devices on DIN 35/7.5 or 15 rail (2 pcs) SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to change the configuration of most of them. For each detected device a list of its registers, which the user can modify, is displayed and also additional informations about device...

 Open the catalog to page 3

All SIMEX Sp. z o.o. catalogs and technical brochures

  1. SLN-44D

    2  Pages

  2. STH-42

    2  Pages

  3. SPP-638

    3  Pages

  4. SLC_30_46_47

    2  Pages

  5. SLN-44

    2  Pages

  6. SLE-42

    2  Pages

  7. SWZ-W610

    3  Pages

  8. SPP-N118

    3  Pages

  9. SPP-94

    3  Pages

  10. SPI-638

    3  Pages

  11. SPI-N118

    3  Pages

  12. SPI-94

    3  Pages

  13. STI-638

    3  Pages

  14. STI-N118

    3  Pages

  15. STI-94

    3  Pages

  16. STI-73

    3  Pages

  17. SLN-94

    3  Pages

  18. SLK-94T

    3  Pages

  19. SLIK-638

    3  Pages

  20. SLB-94

    3  Pages

  21. SLIK-94

    3  Pages

  22. SLIK-73

    3  Pages

  23. SLE-73

    3  Pages

  24. SLC-457

    3  Pages

  25. SLC-94

    3  Pages

  26. SCK-11

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.