Accessories for SIMEX meters MOUNTING PLATES SMP-99/94 to mount 96 x 48 mm size unit in place of 96 x 96 mm cut-out SMP-147/94 to mount 96 x 48 mm size unit in place of 144 x 72 mm cut-out SMP-147/73 to mount 72 x 36 mm size unit in place of 144 x 72 mm cut-out SMP-1414/99 to mount 96 x 96 mm size unit in place of 144 x 144 mm cut-out SRH-94 TS-35 DIN rail brackets for 96 x 48 mm case SRH-99 TS-35 DIN rail brackets for 96 x 96 mm case SRH-141 TS-35 DIN rail brackets for 144 x 144 mm case SECURITY DOOR WITH LOCK 147 mm 100 mm STD-77 transparent IP 54 door with lock for 72 x 72 mm case STD-99 transparent IP 54 door with lock for 96 x 96 mm case STD-141 transparent IP 54 door with lock for 144 x 144 mm case SIMEX Ltd., Wielopole 11, 80-556 Gdańsk, Poland, tel. (+48) 58 762-07-77, fax 58 762-07-70, www.simex.pl Transparent door with moulded frame acc. to DIN 43700, lockable with security key. Door and frame are made by injection moulding thus assuring an exact fit, an optimal choice of a material which is very strong and with no risk of corrosion; perfect seal-protective system IP 54 provided by all-round soft rubber sealing the moulding; door does not swing in or out sideways on opening; door-frame and frontframe can be exchanged.

Accessories for SIMEX meters MOUNTING BRACKETS SPH-07 1 ÷ 7 mm board thickness brackets (2 pcs) standard included with device SPH-05 1 ÷ 5 mm board thickness brackets (2 pcs) SPH-45 1 ÷ 45 mm board thickness brackets (2 pcs) REMOTE CONTROLLER SIR-15 InfraRed remote controllers may be used as external programming keyboard for all SIMEX devices equipped with IR receivers and remote programming functions. Pressing of any local IR controller key, causes transmission of it's code to the device. Functions of particular keys depend on devices features. Power supply voltage: Operation range: 6V DC -...

Accessories for SIMEX meters SOFTWARE S-Config 2 is used for the simultaneous detection of devices in multiple Modbus RTU networks and allows user to change the configuration of most of them. For each detected device a list of its registers, which the user can modify, is displayed and also additional informations about device parameters (type, address in the network, etc.). S-Config software can be downloaded from SIMEX website at www.simex.pl SimCorder Soft is a visualisation application created to facilitate work with advanced networks of the SIMEX devices, for acquisition, visualisation, reporting,...