X 120 CNC Automatic cutting machine capable to miter cutting maintaining a high production rate. Capable of cutting ferrous and non ferrous materials with round, square or rectangular section. Round tube: from Ø 12mm, to Ø 100mm (optional: max Ø mm 120); Square tube: from 12 x 12mm, to 100 x 100mm (optional: max 110 x 110); Rectangular: from 12 x 12mm, to 120 x 100mm; Bar: from Ø 12mm, a Ø 45mm. CUTTING HEAD ► Vertical movement from top to bottom, mounted on linear guides. ► Transmission composed of cemented and ground helical gears. ► Automatic lubrication of the sliding trolley of the head and clamping device. ► Automatic head rotation up to +/- 45 ° by brushless motor. ► Blade diameter min. ø 275 - max. 350 mm in HSS or TCT. ► 5,5 Kw blade motor with interveter for speeds from 50 to 200 r.p.m .. ► Cooling and lubrication of the blade with emulsion through electric pump, or mist type with oil (Bilube tipe is optional). ► Head descent through recirculating ball screw operated by brushless motor. This allows the operator to have a variable feed speed during the cutting stroke (slow-fast-slow depending on the amount of chip to be removed). MATERIAL FEEDING ► The gripper is powered by a recirculating ball screw and a Brushless motor, with a stroke of 2,000 mm (standard). ► The CNC unit controls the cutting length, the quantity of pieces or groups of pieces, the cutting angle or angles, as well as the unloading position. ► Possibility to cut different lengths from the same bar, and also to match the various cutting angles in order to avoid the production of waste pieces, where possible. ► hydraulic movement of the openings and closings of the feeding gripper and of the vices; the pressure of both is adjustable. ► always close the piece in the central position. No manual adjustments are required when changing the bar. ► closing of the material on both sides of the blade, prismatic quick-change jaws. ► Unloading axis to be able to cut the same corners on both sides of the piece. ► Safety and soundproof cabin. ► All openings are protec

LOADERS TYPE AUTOMATIC SLOPE LOADER “M” Suitable for the following material dimension: ► Round tubes from Ø 12mm to Ø 90mm. ► Square tubes from 12x12mm to 100X100mm. ► Rectangular tubes from 12x12mm to 120x80mm. ► Wall thickness up to 5mm for steel and stainless steel. ► Tube length from 2.5m to 6.5m (optional up to 9m). ► Loader gripper to feed the material into the machine. ► Load capacity limited to the inclined chute. ► Loader support to position the material on the inclined plane. Others options will be indicated in an official quote. AUTOMATIC BUNDLE LOADER “BM” Suitable for the following...

CUTTING MACHINE OPTIONS ► Optimization software that allows getting the minimum scrap in the bar and allows cutting many different angles even out of axis. ► Automatic head rotation +/-60°. ► Oil mist blade lubrication. ► Heating device for the hydraulic oil. ► Chips conveyor. ► Customized discharge device.