Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. SIMEC srl
  3. SIMAX 100
video corpo

SIMAX 100

SIMAX 100
1 / 2 PagesView full catalog

SIMAX 100

Product catalog summary
Overview: The document describes a high-efficiency automatic sawing machine designed for cutting bars of various shapes and sizes. It includes detailed specifications and options for loaders and unloaders, as well as additional features to enhance performance and efficiency.
Main Specifications:
  • The sawing machine is equipped with a high-efficiency carbide blade suitable for round, square, and rectangular bars.
  • Round bar dimensions range from Ø 20mm to Ø 100mm, square bars from 20x20mm to 75x75mm, and rectangular bars from 20x20mm to 100x50mm.
  • The cutting head is inclined at 45° and moves on six linear roller bearings, controlled by a servo motor.
  • Features include a ceramic blade guide, automatic lubrication, and an oil cooler for the gearbox.
Infeeding Device:
  • Controlled by a CN in-feeding gripper with a servo motor, offering an 800 mm stroke with duplication options for longer pieces.
  • Automatic positioning and no manual adjustment required for clamps.
  • Double clamping vices and hydraulic clamping ensure stability during cutting.
  • Feeding speed is 24m/min with automatic lubrication.
Loader Options:
  • Slope Loader: Suitable for round and square bars, with a length capacity of 2000mm to 6000mm (optional up to 9m).
  • Bundle Loader: Handles round and square bars with a load capacity of 6000kg, and optional length up to 9000mm.
  • Manual adjustment is available to set the bar diameter, and protective coverings can be added to prevent scratches.
Unloader Belt:
  • Standard length of 1000mm, motorized with two position controls via an inverter.
  • Hardened steel belt for moving pieces, with designated unloading positions for pieces and scraps.
Additional Features:
  • Options include an unloader deflector, chips conveyor, smoke extractor, and remote assistance device.
  • A third axis supports long pieces during cutting and optimizes bar end usage, with pneumatic movements.
Customization and Contact: For further customization options and official quotes, users are encouraged to enter their data in the reserved area and contact the company.
See more

Catalog excerpts

SIMAX 100-1

SIMAX 100 Entirely automatic sawing machine with high-efficiency carbide blade. This sawing machine is used in the high cutting production of bars of round section, and squares and is equipped of an automatic loader to feed the unit of cut in continuous cycle. Round bar: from Ø 20mm, to Ø 100mm; Square bar: from 20x20mm, to 75x75mm; Rectangular bar: from 20x20mm, to 100x50mm. CUTTING HEAD of the cutting head inclined 45° on six linear roller bearings. cutting head feeding is controlled by servo motor. ► Ceramic blade guide. ► No backlash for the power brake. ► Automatic lubrication of the slides. ► Oil cooler to guarantee a long life of the gear box and minimum cutting tolerance. ► Blade brush chips removal. ► The INFEEDING DEVICE CN in-feeding gripper by Servo motor with a stroke of 800 mm, possibility of duplications for longer pieces. ► Automatic positioning of the in-feeding length. ► No manual adjustment of the clamps. ► Double clamping vices, on both sides of the saw blade. ► Hydraulic clamping both horizontal and vertical. ► Lifting infeeding unit to prevent material scratches. ► Feeding speed: 24m/min. ► Automatic lubrication of the different movements. ► OTHERS OPTIONS ► Unloader deflector. ► Chips conveyor. ► Smoke extractor. ► Remote assistance device through ethernet cable or wi-fi network. ► The third axis, mounted after the cutting unit, allows to support the long pieces during the cutting, moreover, allows the reduction of the scrap by optimizing the bar end. All the

 Open the catalog to page 1
SIMAX 100-2

SLOPE LOADER This loader is suitable for the following material dimension: ► Round bar from 0 20mm to 0 100mm. ► Square bar from 20x20mm to 75x75mm. ► Length of the bars from 2000mm up to 6000 mm loader (optional up to 9m). ► Load capacity limited to the inclined chute. ► Manual adjustment through hand wheel to set the diameter of the bar. Others options will be indicated in an official quote. BUNDLE LOADER This loader is suitable for the following material dimension: ► Round bar from 0 20mm to 0 100mm. ► Square bar from 20x20mm to 75x75mm. ► Length of the bars from 2000mm up to 6000 mm loader (optional...

 Open the catalog to page 2

All SIMEC srl catalogs and technical brochures

  1. Fiber Laser Cutting Line
    Fiber Laser Cutting Line

    5  Pages

  2. SIMAX Cutting Line
    SIMAX Cutting Line

    7  Pages

  3. X 120 CNC
    X 120 CNC

    3  Pages

  4. MEC 3000
    MEC 3000

    3  Pages

Archived catalogs

  1. CICOLMEC 1000
    CICOLMEC 1000

    4  Pages

  2. Simax 80
    Simax 80

    9  Pages

  3. Simax 100
    Simax 100

    9  Pages

  4. SIMAX 150
    SIMAX 150

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.