MEC 3000
3Pages

CUTTING SOLUTIONS Automatic metal cutting machine for higth production with a high quality of cut in tolerance and perpendicularity, adapt for any kind of solid bars as well as tubes in round, square or rectangular section, or profiles. Round tube: from 0 12mm, to 0 100mm; Square tube: from 12x12mm, to 80x80mm; Rectangular: from 10x20mm, to 120x80mm; Bar: from 0 10mm, a 0 40mm. STANDARD CUTTING HEAD ► Sliding of the cutting head on linear guides. ► Inclination of the head 30 °. ► Composed with hardened and ground helicoidal gears to obtain an high operating rate, without any play or vibration of the saw blade. ► Blade speed: from 30rpm to 300rpm. ► HSS or TCT blade. ► Diameter the blade min 0 250 mm - max 315 mm. ► Oil mist blade lubrication. ► Movement of the head through ball screw, controlled by Brushless motor. ► 5.5 kw head motor. AUTOMATIC SLOPE LOADER “M” Suitable for the following material dimension: ► Round tubes from 012mm to 0 90mm. ► Square tubes from 12x12mm to 100X100mm. ► Rectangular tubes from 10x20mm to 120x80mm. ► Wall thickness up to 5mm for steel and stainless steel. ► Tube length from 2.5m to 6.5m (optional up to 9m). ► Loader gripper to feed the material into the machine. ► Load capacity limited to the inclined chute. ► Loader support to position the material on the inclined plane. Others options will be indicated in an official quote.

AUTOMATIC BUNDLE LOADER “BM” Suitable for the following material dimension: ► Round tubes from Ø 12mm to Ø 90mm. ► Square tubes from 12x12mm to 100X100mm. ► Rectangular tubes from 10x20mm to 120x80mm. ► Wall thickness up to 5mm for steel and stainless steel. ► Tube length from 2.5m to 6.5m (optional up to 12m). ► Carrying capacity 2000kg (for a 6.5m loader). ► Automatic vertical and horizontal in-feeding device from the bundle of tubes to the cutting machine. ► Loader gripper to feed the material into the machine. Others options will be indicated in an official quote. CUTTING MACHINE DEVICE...

This machine is normally inline the cutting unit and is used for remove the burr from the edges of the tube. The pieces, fall from the discharge of the cutting unit within the deburring machine where, an automatic chain, bring the pieces through the steel brushes and then discharge them. CHARACTERISTIC: This machine is suitable for the following material dimension: ► Round tubes: from 0 12mm to 0 80mm. ► Square tubes: from 12x12mm to 80X80mm. ► Pieces length: from 200mm to 3000mm. ► Fast device for feed the deburring machine. ► Chain with teeth for tube transport. ► Speed of transport...